EFM-COMMON-MIB :: dot3OamErrSymPeriodWindowLo

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EFM-COMMON-MIB › dot3OamErrSymPeriodWindowLo

dot3OamErrSymPeriodWindowLo

Module: EFM-COMMON-MIB

OID (symbolic): EFM-COMMON-MIB::dot3OamErrSymPeriodWindowLo

OID (numeric): 1.3.6.1.2.1.9908.1.5.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The two objects dot3OamErrSymPeriodWindowHi and dot3OamErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as

dot3OamErrSymPeriodWindow = ((2^32)*dot3OamErrSymPeriodWindowHi) + dot3OamErrSymPeriodWindowLo

If dot3OamErrSymPeriodThreshold symbol errors occur within a window of dot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window.

The default value for dot3OamErrSymPeriodWindow is the number of symbols in one second for the underlying physical layer.

What is dot3OamErrSymPeriodWindowLo?

The low-order 32 bits of the 64-bit symbol-count window used to evaluate the Errored Symbol Period event, paired with dot3OamErrSymPeriodWindowHi; defaults to the number of symbols in one second on the underlying physical layer.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.9908.1.5.1.2
snmpwalk -v2c -c public <target> EFM-COMMON-MIB::dot3OamErrSymPeriodWindowLo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.9908.1.5.1.2.1
snmpget -v2c -c public <target> EFM-COMMON-MIB::dot3OamErrSymPeriodWindowLo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.9908.1.5.1.2.1 i <value>

Start monitoring Ethernet access/carrier equipment supporting 802.3ah EFM OAM (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EFM-COMMON-MIB::dot3OamErrSymPeriodWindowLo OID value, configure state conditions and alerts, and monitor any Ethernet access/carrier equipment supporting 802.3ah EFM OAM (vendor-neutral IETF standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.9908efmOamMIBEFM-COMMON-MIB
1.3.6.1.2.1.9908.1dot3OamMIBEFM-COMMON-MIB
1.3.6.1.2.1.9908.1.5dot3OamEventConfigTableEFM-COMMON-MIB
1.3.6.1.2.1.9908.1.5.1dot3OamEventConfigEntryEFM-COMMON-MIB
1.3.6.1.2.1.9908.1.5.1.2dot3OamErrSymPeriodWindowLoEFM-COMMON-MIB