All MIBs › EATON-EPDU-PU-MI-MIB › lowCurrentThreshold32
lowCurrentThreshold32
Module: EATON-EPDU-PU-MI-MIB
OID (symbolic): EATON-EPDU-PU-MI-MIB::lowCurrentThreshold32
OID (numeric): 1.3.6.1.4.1.20677.3.1.1.5.32
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Low current threshold channel 32
What is lowCurrentThreshold32?
Read-write Integer32 (0-100) setting the low-current alarm threshold, in amps, for measurement channel 32 on this ePDU. An admin lowers or raises this so the system flags an alarm if channel 32's measured current drops below it — useful for catching a failed load, tripped breaker, or disconnected device downstream.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20677.3.1.1.5.32 snmpwalk -v2c -c public <target> EATON-EPDU-PU-MI-MIB::lowCurrentThreshold32
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20677.3.1.1.5.32.1 snmpget -v2c -c public <target> EATON-EPDU-PU-MI-MIB::lowCurrentThreshold32.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.20677.3.1.1.5.32.1 i <value>
Start monitoring Eaton ePDU Power Unit Metered Input (blue display) PDU with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-EPDU-PU-MI-MIB::lowCurrentThreshold32 OID value, configure state conditions and alerts, and monitor any Eaton ePDU Power Unit Metered Input (blue display) PDU from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20677 | pulizzi | EATON-EPDU-PU-MI-MIB |
| 1.3.6.1.4.1.20677.3 | monitoredepdu | EATON-EPDU-PU-MI-MIB |
| 1.3.6.1.4.1.20677.3.1 | epdum1 | EATON-EPDU-PU-MI-MIB |
| 1.3.6.1.4.1.20677.3.1.1 | epdum11 | EATON-EPDU-PU-MI-MIB |
| 1.3.6.1.4.1.20677.3.1.1.5 | lowCurrentThresh | EATON-EPDU-PU-MI-MIB |
| 1.3.6.1.4.1.20677.3.1.1.5.32 | lowCurrentThreshold32 | EATON-EPDU-PU-MI-MIB |