E5-110-TRAPS-MIB

All MIBs › E5-110-TRAPS-MIB

Category: Alarm and Event Management, Domain: DSL/xPON, Vendor: Calix

Description: Trap definitions for the Calix E5-110 access platform providing fault and threshold-crossing notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is E5-110-TRAPS-MIB?

E5-110-TRAPS-MIB defines trap/alarm notifications for the Calix E5-110 access platform, a broadband access node used by service providers to deliver DSL/fiber access services. It exposes an alarm table capturing the affected managed object class and instance identifiers (up to eight instance dimensions), plus the alarm type, for fault conditions occurring on the platform. This is fundamentally a fault/alarm MIB used for monitoring hardware and software health: it lets an operator see which object -- a line card, port, or software process, for example -- raised an alarm, what specific instance was affected, and what kind of alarm/severity it represents, enabling rapid fault detection across the platform. It depends on Calix's broader E5-110 object model, since e5AlarmObjectClass and the instance fields reference objects defined elsewhere in the platform's MIB set. It is typically deployed by broadband service providers operating Calix E5-110 access platforms in central offices or remote terminals to receive real-time fault notifications from the field. Network engineers evaluating or troubleshooting this functionality can download the E5-110-TRAPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in E5-110-TRAPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Calix E5-110 broadband access platform

Monitoring Examples

When a fault occurs, an NMS would receive a trap referencing an entry in e5AlarmTable, reading e5AlarmObjectClass and the e5AlarmObjectInstance1 through e5AlarmObjectInstance8 fields to identify exactly which line card, port, or subsystem triggered the alarm, and e5AlarmType to classify the fault, such as a line-card failure or a loss-of-signal condition. This lets operators pinpoint and triage hardware or service-affecting faults on the E5-110 platform quickly.

What Can Be Monitored

active alarm entries and object class/instance
alarm type/severity
faulted line card, port, or subsystem identification

Imported Objects

From E5-110-IESCOMMON-MIB

iesChassisId	OBJECT-TYPE
iesSlotId	OBJECT-TYPE

From E5-110-MIB

e5x110

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString
ifIndex

From SNMPv2-SMI

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
trap	1.3.6.1.4.1.6321.1.2.3.1.12
object	1.3.6.1.4.1.6321.1.2.3.1.12.1
INT eqptAlarmInputIndex	1.3.6.1.4.1.6321.1.2.3.1.12.1.2	INTEGER	read-only	The index of alarm input.
STR eqptAlarmInputName	1.3.6.1.4.1.6321.1.2.3.1.12.1.8	DisplayString	read-only	The Name of alarm input.
INT sysMacAntiSpoofOrig	1.3.6.1.4.1.6321.1.2.3.1.12.1.9	INTEGER	read-only	The Original port of Mac-AntiSpoofing.
INT sysMacAntiSpoofNew	1.3.6.1.4.1.6321.1.2.3.1.12.1.10	INTEGER	read-only	The New port of Mac-AntiSpoofing.
STR sysMacAntiSpoofMAC	1.3.6.1.4.1.6321.1.2.3.1.12.1.11	DisplayString	read-only	The MAC of Mac-AntiSpoofing.
INT sysAlarmOrigSeverity	1.3.6.1.4.1.6321.1.2.3.1.12.1.12	INTEGER	read-only	The original severity of alarm.
INT sysAlarmNewSeverity	1.3.6.1.4.1.6321.1.2.3.1.12.1.13	INTEGER	read-only	The new severity of alarm.
INT sysAlarmConfId	1.3.6.1.4.1.6321.1.2.3.1.12.1.14	INTEGER	read-only	The changed severity of alarm condition ID. 5000:adslLine_up 5001:adslLine_down 5002:adslPerf_lol_thresh 5003:adslPerf_lof_thresh 5004:adslPerf_los_thresh 5005:adslPerf_lop_thresh 5006:adslPerf_es_thresh 5007:adslPerf_ses_thresh 5008:adslPerf_uas_thresh 5009:adslAtuc_loftrap 5010:adslAtuc_lostrap 5011:adslAtur_loftrap 5012:adslAtur_lostrap 5013:adslAtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:eqptI2c_err 10009:eqptAlm_input2 10010:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 20000:enetUp 20001:enetDown
equipment	1.3.6.1.4.1.6321.1.2.3.1.12.3
NTF eqptHWMonitorFailure	1.3.6.1.4.1.6321.1.2.3.1.12.3.1			Hardware monitor diagnosis is failed.
systrap	1.3.6.1.4.1.6321.1.2.3.1.12.4
NTF sysMacAntiSpoofing	1.3.6.1.4.1.6321.1.2.3.1.12.4.1			MAC Anti-spoofing.
NTF sysAlarmCutoffEnable	1.3.6.1.4.1.6321.1.2.3.1.12.4.2			Alarm cutoff is activated.
NTF sysAlarmClearEnable	1.3.6.1.4.1.6321.1.2.3.1.12.4.3			Alarm clear is activated.
NTF sysLoginFailure	1.3.6.1.4.1.6321.1.2.3.1.12.4.4			User login is failed.
NTF sysAlarmSvrtyChange	1.3.6.1.4.1.6321.1.2.3.1.12.4.5			Alarm severity is changed.
interface	1.3.6.1.4.1.6321.1.2.3.1.12.8
e5Alarm	1.3.6.1.4.1.6321.1.2.3.1.12.9
e5AlarmTable	1.3.6.1.4.1.6321.1.2.3.1.12.9.1		not-accessible	This table holds all the active alarms
e5AlarmEntry	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1		not-accessible	List of attributes regarding alarm table
INT e5AlarmObjectClass	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.1	INTEGER	read-only	Object Class for an alarm
INT e5AlarmObjectInstance1	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.2	INTEGER	read-only	Object instance for an alarm, level 1
INT e5AlarmObjectInstance2	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.3	INTEGER	read-only	Object instance for an alarm, level 2
INT e5AlarmObjectInstance3	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.4	INTEGER	read-only	Object instance for an alarm, level 3
INT e5AlarmObjectInstance4	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.5	INTEGER	read-only	Object instance for an alarm, level 4
INT e5AlarmObjectInstance5	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.6	INTEGER	read-only	Object instance for an alarm, level 5
INT e5AlarmObjectInstance6	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.7	INTEGER	read-only	Object instance for an alarm, level 6
INT e5AlarmObjectInstance7	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.8	INTEGER	read-only	Object instance for an alarm, level 7
INT e5AlarmObjectInstance8	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.9	INTEGER	read-only	Object instance for an alarm, level 8
INT e5AlarmType	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.10	INTEGER	read-only	Unique type for an alarm
INT e5AlarmSeverity	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.11	INTEGER	read-only	Severity of the alarm
OCT e5AlarmTimeStamp	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.12	OCTET STRING	read-only	Timestamp indicating the set/clear time of the alarm
INT e5AlarmServiceAffecting	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.13	INTEGER	read-only	Indicated the nature of the alarm i.e. service affecting or not
INT e5AlarmLocationInfo	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.14	INTEGER	read-only
OCT e5AlarmText	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.15	OCTET STRING	read-only	Alarm description
INT e5AlarmTime	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.16	INTEGER	read-only	UTC time
OCT e5AlarmCliObject	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.17	OCTET STRING	read-only	The short CLI name for the object class and instance
INT e5AlarmSecObjectClass	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.18	INTEGER	read-only	Secondary Object Class for an alarm
INT e5AlarmSecObjectInstance1	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.19	INTEGER	read-only	Secondary object instance for an alarm, level 1
INT e5AlarmSecObjectInstance2	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.20	INTEGER	read-only	Secondary object instance for an alarm, level 2
INT e5AlarmSecObjectInstance3	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.21	INTEGER	read-only	Secondary object instance for an alarm, level 3
INT e5AlarmSecObjectInstance4	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.22	INTEGER	read-only	Secondary object instance for an alarm, level 4
INT e5AlarmSecObjectInstance5	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.23	INTEGER	read-only	Secondary object instance for an alarm, level 5
INT e5AlarmSecObjectInstance6	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.24	INTEGER	read-only	Secondary object instance for an alarm, level 6
INT e5AlarmSecObjectInstance7	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.25	INTEGER	read-only	Secondary object instance for an alarm, level 7
INT e5AlarmSecObjectInstance8	1.3.6.1.4.1.6321.1.2.3.1.12.9.1.1.26	INTEGER	read-only	Secondary object instance for an alarm, level 8
NTF e5AlarmNotify	1.3.6.1.4.1.6321.1.2.3.1.12.9.2			E5 device alarm notification.

RFC description

Eaton E5-110 network equipment trap definitions for alarms, equipment status, and MAC anti-spoofing notifications.

Start monitoring Calix E5-110 broadband access platform (alarm/trap notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download E5-110-TRAPS-MIB

What Is E5-110-TRAPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description