All MIBs › DVB-CABLE-NIU-MIB › dvbNiuSwAdminStatus
dvbNiuSwAdminStatus
Module: DVB-CABLE-NIU-MIB
OID (symbolic): DVB-CABLE-NIU-MIB::dvbNiuSwAdminStatus
OID (numeric): 1.3.6.1.3.110.1.1.2.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This will administer the software upgrade and provide status of its progress.
InitiateUpgrade - This is the only admin selectable value and initiates the upgrade ContactingTFTPServer - The TFTP server is being contacted DownloadInProgress - The image is currently being downloaded to the Niu TFTPFailure - There was a failure at the TFTP layer while downloading BadImage - The downloaded software image failed an integrity check BadHardware - The downloaded software image is not suitable for the H/W platform DownloadSuccessful - The downloaded software image has been successful
Idle - No attempt to download software has been made since the last reset
What is dvbNiuSwAdminStatus?
Both starts and reports on a firmware upgrade: setting it to initUpgrd(1) kicks off the download, while reading it back shows progress through contactingTFTPServer and downloadInProgress to downloadSuccessful, or one of the failure states (failureTFTP, badImage, badHardware) if something went wrong. idle means no upgrade attempt has been made since the last reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.110.1.1.2.6 snmpwalk -v2c -c public <target> DVB-CABLE-NIU-MIB::dvbNiuSwAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.110.1.1.2.6.1 snmpget -v2c -c public <target> DVB-CABLE-NIU-MIB::dvbNiuSwAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.110.1.1.2.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dvbNiuSwAdminStatus.1
Start monitoring DVB cable Network Interface Unit/subscriber modem (vendor-neutral DVB/DAVIC standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-CABLE-NIU-MIB::dvbNiuSwAdminStatus OID value, configure state conditions and alerts, and monitor any DVB cable Network Interface Unit/subscriber modem (vendor-neutral DVB/DAVIC standard) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.110 | dvbDevice | DVB-CABLE-NIU-MIB |
| 1.3.6.1.3.110.1 | dvbNiu | DVB-CABLE-NIU-MIB |
| 1.3.6.1.3.110.1.1 | dvbNiuMIBobjects | DVB-CABLE-NIU-MIB |
| 1.3.6.1.3.110.1.1.2 | dvbNiuSoftware | DVB-CABLE-NIU-MIB |
| 1.3.6.1.3.110.1.1.2.6 | dvbNiuSwAdminStatus | DVB-CABLE-NIU-MIB |