All MIBs › DVB-CABLE-INA-MIB › dvbInaIpFilterEnable
dvbInaIpFilterEnable
Module: DVB-CABLE-INA-MIB
OID (symbolic): DVB-CABLE-INA-MIB::dvbInaIpFilterEnable
OID (numeric): 1.3.6.1.3.1.4.1.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This controls the IP filter table. This object can be set to the following values: 'enable(1)': Enables the IP filter table.
'enableAuto(2)': Enables the IP filter table with automatic IP anti-spoofing population by sniffing DHCP messages. 'countHits(3)': This option is used to debug the filter table. It allows packets to be checked against the filter table and increments dvbInaIpFilterMaches for a matching filter. However, all packets are allowed through. 'disabled(4)': Disables IP filtering, all packets are allowed through.
What is dvbInaIpFilterEnable?
Controls the IP filter table as a whole: enable (apply filters normally), enableAuto (also auto-populate anti-spoofing entries by sniffing DHCP traffic), countHits (test mode — packets are checked against filters and matches counted, but everything is still passed), or disabled (all IP filtering off). Admins use countHits to validate a new filter ruleset is matching as expected before actually enforcing it with enable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.1.4.1.6.1 snmpwalk -v2c -c public <target> DVB-CABLE-INA-MIB::dvbInaIpFilterEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.1.4.1.6.1.1 snmpget -v2c -c public <target> DVB-CABLE-INA-MIB::dvbInaIpFilterEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.1.4.1.6.1.1 i <value>
Start monitoring DVB/DAVIC EuroModem cable INA subscriber unit (vendor-neutral standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-CABLE-INA-MIB::dvbInaIpFilterEnable OID value, configure state conditions and alerts, and monitor any DVB/DAVIC EuroModem cable INA subscriber unit (vendor-neutral standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.4 | es_is | CLNS-MIB |
| 1.3.6.1.3.1.4.1 | esisESHins | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.4.1.6 | dvbInaIpFilter | DVB-CABLE-INA-MIB |
| 1.3.6.1.3.1.4.1.6.1 | dvbInaIpFilterEnable | DVB-CABLE-INA-MIB |