All MIBs › DVB-CABLE-INA-MIB › dvbInaEvThrottleAdminStatus
dvbInaEvThrottleAdminStatus
Module: DVB-CABLE-INA-MIB
OID (symbolic): DVB-CABLE-INA-MIB::dvbInaEvThrottleAdminStatus
OID (numeric): 1.3.6.1.3.1.4.1.5.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls the transmission of traps and syslog messages with respect to the trap pacing threshold.
unconstrained(1) causes traps and syslog messages to be transmitted without regard to the threshold settings.
maintainBelowThreshold(2) causes trap transmission and syslog messages to be suppressed if the number of traps would otherwise exceed the threshold.
stopAtThreshold(3) causes trap transmission to cease at the threshold, and not resume until directed to do so.
inhibited(4) causes all trap transmission and syslog messages to be suppressed.
A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event.
Writing to this object resets the thresholding state.
At initial startup, this object has a default value of unconstrained(1).
What is dvbInaEvThrottleAdminStatus?
Controls how trap/syslog transmission behaves relative to the configured pacing threshold: unconstrained (ignore the threshold), maintainBelowThreshold (suppress excess events), stopAtThreshold (stop entirely once the threshold is hit, until told otherwise), or inhibited (block all trap/syslog output); writing to it resets the throttling state, and it defaults to unconstrained at startup. Admins set stopAtThreshold or maintainBelowThreshold to prevent an event storm from flooding their NMS or syslog server during a cascading fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.1.4.1.5.4 snmpwalk -v2c -c public <target> DVB-CABLE-INA-MIB::dvbInaEvThrottleAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.1.4.1.5.4.1 snmpget -v2c -c public <target> DVB-CABLE-INA-MIB::dvbInaEvThrottleAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.1.4.1.5.4.1 i <value>
Start monitoring DVB/DAVIC EuroModem cable INA subscriber unit (vendor-neutral standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-CABLE-INA-MIB::dvbInaEvThrottleAdminStatus OID value, configure state conditions and alerts, and monitor any DVB/DAVIC EuroModem cable INA subscriber unit (vendor-neutral standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.4 | es_is | CLNS-MIB |
| 1.3.6.1.3.1.4.1 | esisESHins | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.4.1.5 | dvbInaEvent | DVB-CABLE-INA-MIB |
| 1.3.6.1.3.1.4.1.5.4 | dvbInaEvThrottleAdminStatus | DVB-CABLE-INA-MIB |