DVB-CABLE-INA-MIB :: dvbInaEthFilterEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DVB-CABLE-INA-MIB › dvbInaEthFilterEnable

dvbInaEthFilterEnable

Module: DVB-CABLE-INA-MIB

OID (symbolic): DVB-CABLE-INA-MIB::dvbInaEthFilterEnable

OID (numeric): 1.3.6.1.3.1.4.1.7.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This contols the Ethernet filter table. This object can be set to the following values: 'enable(1)': Enables the Ethernet filter table.

'countHits(2)': This option is used to debug the filter table. It allows packets to be checked against the filter table and increments dvbInaEthFilterMaches for a matching filter. However, all packets are allowed through.

'disabled(3)': Disables Ethernet filtering, all packets are allowed through.

What is dvbInaEthFilterEnable?

Controls the Ethernet filter table as a whole: enable (apply filters normally), countHits (test mode — matches are counted but all packets still pass, useful for validating rules), or disabled (all Ethernet filtering off). Admins use countHits to test a new Ethernet-level filter set before actually enforcing it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.1.4.1.7.1
snmpwalk -v2c -c public <target> DVB-CABLE-INA-MIB::dvbInaEthFilterEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.1.4.1.7.1.1
snmpget -v2c -c public <target> DVB-CABLE-INA-MIB::dvbInaEthFilterEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.3.1.4.1.7.1.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dvbInaEthFilterEnable.1

Start monitoring DVB/DAVIC EuroModem cable INA subscriber unit (vendor-neutral standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-CABLE-INA-MIB::dvbInaEthFilterEnable OID value, configure state conditions and alerts, and monitor any DVB/DAVIC EuroModem cable INA subscriber unit (vendor-neutral standard) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAPERTUS-NPG-MIB
1.3.6.1.3.1clnsCLNS-MIB
1.3.6.1.3.1.4es_isCLNS-MIB
1.3.6.1.3.1.4.1esisESHinsCLNS-MIB
Numeric OIDNameModule
1.3.6.1.3.1.4.1.7dvbInaEthFilterDVB-CABLE-INA-MIB
1.3.6.1.3.1.4.1.7.1dvbInaEthFilterEnableDVB-CABLE-INA-MIB