DT1-MIB :: dt1CfgIdleDiscPatt

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DT1-MIB › dt1CfgIdleDiscPatt

dt1CfgIdleDiscPatt

Module: DT1-MIB

OID (symbolic): DT1-MIB::dt1CfgIdleDiscPatt

OID (numeric): 1.3.6.1.4.1.429.1.3.2.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Idle disconnect pattern sent to the modems. Normal values: USA = 1, international = 84. Default = 1. Configure the modems identically. Consult the help screen, user manual or US Robotics before changing.

What is dt1CfgIdleDiscPatt?

The idle-disconnect pattern sent to attached modems (normally 1 for USA, 84 international); modems on the line must be configured identically, so check the manual or vendor support before changing it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.3.2.1.1.6
snmpwalk -v2c -c public <target> DT1-MIB::dt1CfgIdleDiscPatt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.3.2.1.1.6.1
snmpget -v2c -c public <target> DT1-MIB::dt1CfgIdleDiscPatt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.1.3.2.1.1.6.1 i <value>

Start monitoring T1/DS1 interface cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DT1-MIB::dt1CfgIdleDiscPatt OID value, configure state conditions and alerts, and monitor any T1/DS1 interface cards from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.1nasANIC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.1.3dt1DT1-MIB
1.3.6.1.4.1.429.1.3.2dt1CfgDT1-MIB
1.3.6.1.4.1.429.1.3.2.1dt1CfgTableDT1-MIB
1.3.6.1.4.1.429.1.3.2.1.1dt1CfgEntryDT1-MIB
1.3.6.1.4.1.429.1.3.2.1.1.6dt1CfgIdleDiscPattDT1-MIB

Module

This MIB depends on