DS1-MIB :: dsx1LineLength

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDS1-MIBdsx1LineLength

dsx1LineLength

Module: DS1-MIB

OID (symbolic): DS1-MIB::dsx1LineLength

OID (numeric): 1.3.6.1.2.1.10.18.6.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The length of the DS1 line in meters. This object provides information for line build-out circuitry. This object is only useful if the interface has configurable line build-out circuitry.

What is dsx1LineLength?

Read-write length of the DS1 line in meters, used by the interface's line build-out circuitry to pick the right transmit attenuation; only meaningful on hardware with configurable line build-out, and is ignored otherwise.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.15
snmpwalk -v2c -c public <target> DS1-MIB::dsx1LineLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.15.1
snmpget -v2c -c public <target> DS1-MIB::dsx1LineLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.18.6.1.15.1 i <value>

Start monitoring Router/telecom equipment with T1/E1 (DS1/E1/DS2/E2) interfaces (vendor-neutral IETF standard RFC 4805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS1-MIB::dsx1LineLength OID value, configure state conditions and alerts, and monitor any Router/telecom equipment with T1/E1 (DS1/E1/DS2/E2) interfaces (vendor-neutral IETF standard RFC 4805) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.18ds1DS1-MIB
1.3.6.1.2.1.10.18.6dsx1ConfigTableDS1-MIB
1.3.6.1.2.1.10.18.6.1dsx1ConfigEntryDS1-MIB
1.3.6.1.2.1.10.18.6.1.15dsx1LineLengthDS1-MIB