DS1-MIB :: dsx1LineBuildOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDS1-MIBdsx1LineBuildOut

dsx1LineBuildOut

Module: DS1-MIB

OID (symbolic): DS1-MIB::dsx1LineBuildOut

OID (numeric): 1.3.6.1.2.1.10.18.6.1.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Attenuation setting for T1 framer in long haul (CSU) mode. The optional values are -7.5dB, -15dB, -22.5dB, and 0dB.

What is dsx1LineBuildOut?

Read-write transmit attenuation setting for a T1 framer in CSU (long-haul) mode, choosing notApplicable(1), -7.5dB, -15dB, -22.5dB, or 0dB; an admin tunes this to match the cable run length so the far end receives a properly leveled signal rather than one that's over- or under-driven.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.22
snmpwalk -v2c -c public <target> DS1-MIB::dsx1LineBuildOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.6.1.22.1
snmpget -v2c -c public <target> DS1-MIB::dsx1LineBuildOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.18.6.1.22.1 i <value>

Start monitoring Router/telecom equipment with T1/E1 (DS1/E1/DS2/E2) interfaces (vendor-neutral IETF standard RFC 4805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS1-MIB::dsx1LineBuildOut OID value, configure state conditions and alerts, and monitor any Router/telecom equipment with T1/E1 (DS1/E1/DS2/E2) interfaces (vendor-neutral IETF standard RFC 4805) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.18ds1DS1-MIB
1.3.6.1.2.1.10.18.6dsx1ConfigTableDS1-MIB
1.3.6.1.2.1.10.18.6.1dsx1ConfigEntryDS1-MIB
1.3.6.1.2.1.10.18.6.1.22dsx1LineBuildOutDS1-MIB