All MIBs › DS0-MIB › dsx0TransmitCodesEnable
dsx0TransmitCodesEnable
Module: DS0-MIB
OID (symbolic): DS0-MIB::dsx0TransmitCodesEnable
OID (numeric): 1.3.6.1.2.1.10.81.1.1.7
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object determines if the idle and seized codes are transmitted. If the value of this object is true then the codes are transmitted.
What is dsx0TransmitCodesEnable?
This read-write boolean controls whether the configured idle and seized ABCD codes are actually transmitted on the DS0 channel, with true enabling transmission. Admins enable it when they need the device to actively signal idle/seized state to the far end rather than relying on default line behavior. For example, turning this on for a channel that uses dsx0IdleCode and dsx0SeizedCode makes those custom bit patterns take effect on the wire.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.81.1.1.7 snmpwalk -v2c -c public <target> DS0-MIB::dsx0TransmitCodesEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.81.1.1.7.1 snmpget -v2c -c public <target> DS0-MIB::dsx0TransmitCodesEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.81.1.1.7.1 s <value>
Start monitoring Channelized T1/E1 telecom equipment (DS0 channel interfaces, vendor-neutral IETF standard RFC 2494) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS0-MIB::dsx0TransmitCodesEnable OID value, configure state conditions and alerts, and monitor any Channelized T1/E1 telecom equipment (DS0 channel interfaces, vendor-neutral IETF standard RFC 2494) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.81 | ds0 | DS0-MIB |
| 1.3.6.1.2.1.10.81.1 | dsx0ConfigTable | DS0-MIB |
| 1.3.6.1.2.1.10.81.1.1 | dsx0ConfigEntry | DS0-MIB |
| 1.3.6.1.2.1.10.81.1.1.7 | dsx0TransmitCodesEnable | DS0-MIB |