All MIBs › DS0-MIB › dsx0SeizedCode
dsx0SeizedCode
Module: DS0-MIB
OID (symbolic): DS0-MIB::dsx0SeizedCode
OID (numeric): 1.3.6.1.2.1.10.81.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object contains the code transmitted in the ABCD bits when the ds0 is connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bit
What is dsx0SeizedCode?
This read-write bitmap (0-15) defines the ABCD signaling bits transmitted on a DS0 once the channel is connected (seized) and dsx0TransmitCodesEnable is turned on, using the same bit assignment as dsx0IdleCode (1=D, 2=C, 4=B, 8=A). Admins configure it to match the seized/busy signaling pattern expected by the connected voice equipment. For example, setting it to 15 asserts all four ABCD bits to indicate the channel is actively in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.81.1.1.5 snmpwalk -v2c -c public <target> DS0-MIB::dsx0SeizedCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.81.1.1.5.1 snmpget -v2c -c public <target> DS0-MIB::dsx0SeizedCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.81.1.1.5.1 i <value>
Start monitoring Channelized T1/E1 telecom equipment (DS0 channel interfaces, vendor-neutral IETF standard RFC 2494) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS0-MIB::dsx0SeizedCode OID value, configure state conditions and alerts, and monitor any Channelized T1/E1 telecom equipment (DS0 channel interfaces, vendor-neutral IETF standard RFC 2494) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.81 | ds0 | DS0-MIB |
| 1.3.6.1.2.1.10.81.1 | dsx0ConfigTable | DS0-MIB |
| 1.3.6.1.2.1.10.81.1.1 | dsx0ConfigEntry | DS0-MIB |
| 1.3.6.1.2.1.10.81.1.1.5 | dsx0SeizedCode | DS0-MIB |