All MIBs › DS0-MIB › dsx0IdleCode
dsx0IdleCode
Module: DS0-MIB
OID (symbolic): DS0-MIB::dsx0IdleCode
OID (numeric): 1.3.6.1.2.1.10.81.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object contains the code transmitted in the ABCD bits when the ds0 is not connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bit
What is dsx0IdleCode?
This read-write bitmap (0-15) defines the ABCD signaling bits transmitted on a DS0 when the channel is idle (not connected) and dsx0TransmitCodesEnable is turned on, with bit values 1=D, 2=C, 4=B, 8=A. Admins set it to match the idle signaling pattern their PBX or carrier equipment expects on an unused timeslot. For example, a value of 8 transmits only the A bit while the other three bits stay clear, signaling an idle line per the carrier's convention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.81.1.1.4 snmpwalk -v2c -c public <target> DS0-MIB::dsx0IdleCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.81.1.1.4.1 snmpget -v2c -c public <target> DS0-MIB::dsx0IdleCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.81.1.1.4.1 i <value>
Start monitoring Channelized T1/E1 telecom equipment (DS0 channel interfaces, vendor-neutral IETF standard RFC 2494) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS0-MIB::dsx0IdleCode OID value, configure state conditions and alerts, and monitor any Channelized T1/E1 telecom equipment (DS0 channel interfaces, vendor-neutral IETF standard RFC 2494) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.81 | ds0 | DS0-MIB |
| 1.3.6.1.2.1.10.81.1 | dsx0ConfigTable | DS0-MIB |
| 1.3.6.1.2.1.10.81.1.1 | dsx0ConfigEntry | DS0-MIB |
| 1.3.6.1.2.1.10.81.1.1.4 | dsx0IdleCode | DS0-MIB |