All MIBs › DRAFT-FDDI-MIB-VER-3-2 › fddimibSMTConfigPolicy
fddimibSMTConfigPolicy
Module: DRAFT-FDDI-MIB-VER-3-2
OID (symbolic): DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigPolicy
OID (numeric): 1.3.6.1.3.8.73.1.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A value that indicates the configuration policies currently desired in a node. 'Hold' is one of the terms used for the Hold Flag, an optional ECM flag used to enable the optional Hold policy.
The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table:
Policy Power configurationhold 0
What is fddimibSMTConfigPolicy?
This column sets which configuration policies are currently enforced on this node, encoded the same way as fddimibSMTConfigCapabilities: setting the configurationhold bit enables the optional Hold policy on this station. An administrator writes this to actually turn on a capability the station has already reported as supported.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.8.73.1.2.1.13 snmpwalk -v2c -c public <target> DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigPolicy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.8.73.1.2.1.13.1 snmpget -v2c -c public <target> DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigPolicy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.8.73.1.2.1.13.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> fddimibSMTConfigPolicy.1
Start monitoring FDDI ring network station/interface (vendor-neutral IETF draft standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigPolicy OID value, configure state conditions and alerts, and monitor any FDDI ring network station/interface (vendor-neutral IETF draft standard) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.8 | fddi | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73 | fddimib | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1 | fddimibSMT | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1.2 | fddimibSMTTable | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1.2.1 | fddimibSMTEntry | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1.2.1.13 | fddimibSMTConfigPolicy | DRAFT-FDDI-MIB-VER-3-2 |