All MIBs › DRAFT-FDDI-MIB-VER-3-2 › fddimibSMTConfigCapabilities
fddimibSMTConfigCapabilities
Module: DRAFT-FDDI-MIB-VER-3-2
OID (symbolic): DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigCapabilities
OID (numeric): 1.3.6.1.3.8.73.1.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A value that indicates the configuration capabilities of a node. The 'Hold Available' bit indicates the support of the optional Hold Function, which is controlled by fddiSMTConfigPolicy. The 'CF-Wrap-AB' bit indicates that the station has the capability of performing a wrap_ab (refer to ANSI SMT 9.7.2.2).
The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table:
Policy Power holdAvailable 0 CF-Wrap-AB 1
What is fddimibSMTConfigCapabilities?
This column reports which optional configuration capabilities this node supports, encoded as a bitmask: the Hold Available bit indicates support for the optional Hold function, and the CF-Wrap-AB bit indicates the station can perform a wrap_ab reconfiguration. An administrator reads it to know which advanced configuration behaviors a given station is capable of before trying to enable them.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.8.73.1.2.1.12 snmpwalk -v2c -c public <target> DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.8.73.1.2.1.12.1 snmpget -v2c -c public <target> DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigCapabilities.1
Start monitoring FDDI ring network station/interface (vendor-neutral IETF draft standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DRAFT-FDDI-MIB-VER-3-2::fddimibSMTConfigCapabilities OID value, configure state conditions and alerts, and monitor any FDDI ring network station/interface (vendor-neutral IETF draft standard) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.8 | fddi | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73 | fddimib | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1 | fddimibSMT | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1.2 | fddimibSMTTable | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1.2.1 | fddimibSMTEntry | DRAFT-FDDI-MIB-VER-3-2 |
| 1.3.6.1.3.8.73.1.2.1.12 | fddimibSMTConfigCapabilities | DRAFT-FDDI-MIB-VER-3-2 |