DRAFT-FDDI-MIB-VER-3-2 :: fddimibPATHTVXLowerBound

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DRAFT-FDDI-MIB-VER-3-2 › fddimibPATHTVXLowerBound

fddimibPATHTVXLowerBound

Module: DRAFT-FDDI-MIB-VER-3-2

OID (symbolic): DRAFT-FDDI-MIB-VER-3-2::fddimibPATHTVXLowerBound

OID (numeric): 1.3.6.1.3.8.73.4.2.1.3

Node type: OBJECT-TYPE

Type: FddiTimeNano

Access: read-write

Description: Specifies the minimum time value of fddiMACTvxValue that shall be used by any MAC that is configured in this path. The operational value of fddiMACTvxValue is managed by settting this variable. This variable has the time value range of:

0 < fddimibPATHTVXLowerBound < fddimibPATHMaxTReq

Changes to this variable shall either satisfy the time value relationship:

fddimibPATHTVXLowerBound <= fddimibMACTVXCapability

of each of the MACs currently on the path, or be considered out of range. The initial value of fddimibPATHTVXLowerBound shall be 2500 nsec (2.5 ms).

What is fddimibPATHTVXLowerBound?

This column sets the minimum TVX, valid transmission timer, value that any MAC configured onto this path is allowed to use, and it must stay compatible with each attached MAC's own TVX capability. It defaults to 2500 nanoseconds; an administrator raising or lowering it directly manages the operational TVX value used across the path's MACs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.8.73.4.2.1.3
snmpwalk -v2c -c public <target> DRAFT-FDDI-MIB-VER-3-2::fddimibPATHTVXLowerBound

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.8.73.4.2.1.3.1
snmpget -v2c -c public <target> DRAFT-FDDI-MIB-VER-3-2::fddimibPATHTVXLowerBound.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.3.8.73.4.2.1.3.1 s <value>

Start monitoring FDDI ring network station/interface (vendor-neutral IETF draft standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DRAFT-FDDI-MIB-VER-3-2::fddimibPATHTVXLowerBound OID value, configure state conditions and alerts, and monitor any FDDI ring network station/interface (vendor-neutral IETF draft standard) from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAPERTUS-NPG-MIB
Numeric OIDNameModule
1.3.6.1.3.8fddiDRAFT-FDDI-MIB-VER-3-2
1.3.6.1.3.8.73fddimibDRAFT-FDDI-MIB-VER-3-2
1.3.6.1.3.8.73.4fddimibPATHDRAFT-FDDI-MIB-VER-3-2
1.3.6.1.3.8.73.4.2fddimibPATHTableDRAFT-FDDI-MIB-VER-3-2
1.3.6.1.3.8.73.4.2.1fddimibPATHEntryDRAFT-FDDI-MIB-VER-3-2
1.3.6.1.3.8.73.4.2.1.3fddimibPATHTVXLowerBoundDRAFT-FDDI-MIB-VER-3-2