All MIBs › DOT3-MAU-MIB › ifJackType
ifJackType
Module: DOT3-MAU-MIB
OID (symbolic): DOT3-MAU-MIB::ifJackType
OID (numeric): 1.3.6.1.2.1.26.2.2.1.2
Node type: OBJECT-TYPE
Type: JackType
Access: read-only
Description: The jack connector type, as it appears on the outside of the system.
What is ifJackType?
Reports the physical connector type (e.g. RJ45, LC fiber) visible on the outside of the chassis for this interface's jack, the ifIndex-based counterpart to rpJackType.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.26.2.2.1.2 snmpwalk -v2c -c public <target> DOT3-MAU-MIB::ifJackType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.26.2.2.1.2.1 snmpget -v2c -c public <target> DOT3-MAU-MIB::ifJackType.1
Start monitoring Network equipment with IEEE 802.3 MAU transceivers (vendor-neutral IETF standard RFC 4836) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT3-MAU-MIB::ifJackType OID value, configure state conditions and alerts, and monitor any Network equipment with IEEE 802.3 MAU transceivers (vendor-neutral IETF standard RFC 4836) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.26 | snmpDot3MauMgt | DOT3-MAU-MIB |
| 1.3.6.1.2.1.26.2 | dot3IfMauBasicGroup | DOT3-MAU-MIB |
| 1.3.6.1.2.1.26.2.2 | ifJackTable | DOT3-MAU-MIB |
| 1.3.6.1.2.1.26.2.2.1 | ifJackEntry | DOT3-MAU-MIB |
| 1.3.6.1.2.1.26.2.2.1.2 | ifJackType | DOT3-MAU-MIB |