All MIBs › DOT3-EPON-MIB › dot3ExtPkgOptIfUpperOutputPowerThreshold
dot3ExtPkgOptIfUpperOutputPowerThreshold
Module: DOT3-EPON-MIB
OID (symbolic): DOT3-EPON-MIB::dot3ExtPkgOptIfUpperOutputPowerThreshold
OID (numeric): 1.3.6.1.2.1.155.1.4.1.5.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The upper limit threshold on output power. If dot3ExtPkgOptIfOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading will present the threshold value. Writing will set the value of the threshold. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgOptIfUpperOutputPowerThreshold can lead to a Threshold Crossing Alert (TCA) being sent for the respective interface. This alert may be leading to an interruption of service of the users connected to the respective EPON interface, depending on the system action on such an alert. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface.
What is dot3ExtPkgOptIfUpperOutputPowerThreshold?
This read-write value sets the upper output-power alarm threshold, in 0.1 dBm units; when dot3ExtPkgOptIfOutputPower reaches or exceeds it, a Threshold Crossing Alert should be raised. It flags a transmitter running hotter than expected, which can shorten optical component life.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.155.1.4.1.5.1.11 snmpwalk -v2c -c public <target> DOT3-EPON-MIB::dot3ExtPkgOptIfUpperOutputPowerThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.155.1.4.1.5.1.11.1 snmpget -v2c -c public <target> DOT3-EPON-MIB::dot3ExtPkgOptIfUpperOutputPowerThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.155.1.4.1.5.1.11.1 i <value>
Start monitoring EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT3-EPON-MIB::dot3ExtPkgOptIfUpperOutputPowerThreshold OID value, configure state conditions and alerts, and monitor any EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.155 | dot3EponMIB | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1 | dot3EponObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4 | dot3ExtPkgObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1 | dot3ExtPkgControlObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5 | dot3ExtPkgOptIfTable | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5.1 | dot3ExtPkgOptIfEntry | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5.1.11 | dot3ExtPkgOptIfUpperOutputPowerThreshold | DOT3-EPON-MIB |