All MIBs › DOT3-EPON-MIB › dot3ExtPkgOptIfTransmitEnable
dot3ExtPkgOptIfTransmitEnable
Module: DOT3-EPON-MIB
OID (symbolic): DOT3-EPON-MIB::dot3ExtPkgOptIfTransmitEnable
OID (numeric): 1.3.6.1.2.1.155.1.4.1.5.1.14
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting this object to true(1) will cause the optical interface to start transmission (according to the control protocol specified for the logical interface). Setting this object to false(2) will cause the interface to stop the optical transmission. When getting true(1), the optical interface is in transmitting mode (obeying to the logical control protocol). When getting false(2), the optical interface is not in transmitting mode. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgOptIfTransmitEnable state can lead to a halt in the optical transmission of the respective interface leading to an interruption of service of the users connected to the respective EPON interface. The object is relevant when the admin state of the interface is active as set by the dot3MpcpAdminState. This object is applicable for an OLT and an ONU. At the OLT it, has a distinct value for each virtual interface.
What is dot3ExtPkgOptIfTransmitEnable?
Setting this true starts optical transmission on the interface and false stops it, relevant only while the interface's admin state (dot3MpcpAdminState) is active. Admins use this to deliberately silence a laser, for example during fiber work, knowing it halts service for subscribers on that link until re-enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.155.1.4.1.5.1.14 snmpwalk -v2c -c public <target> DOT3-EPON-MIB::dot3ExtPkgOptIfTransmitEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.155.1.4.1.5.1.14.1 snmpget -v2c -c public <target> DOT3-EPON-MIB::dot3ExtPkgOptIfTransmitEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.155.1.4.1.5.1.14.1 s <value>
Start monitoring EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT3-EPON-MIB::dot3ExtPkgOptIfTransmitEnable OID value, configure state conditions and alerts, and monitor any EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.155 | dot3EponMIB | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1 | dot3EponObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4 | dot3ExtPkgObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1 | dot3ExtPkgControlObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5 | dot3ExtPkgOptIfTable | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5.1 | dot3ExtPkgOptIfEntry | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5.1.14 | dot3ExtPkgOptIfTransmitEnable | DOT3-EPON-MIB |