All MIBs › DOT3-EPON-MIB › dot3ExtPkgOptIfLowerOutputPowerThreshold
dot3ExtPkgOptIfLowerOutputPowerThreshold
Module: DOT3-EPON-MIB
OID (symbolic): DOT3-EPON-MIB::dot3ExtPkgOptIfLowerOutputPowerThreshold
OID (numeric): 1.3.6.1.2.1.155.1.4.1.5.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The lower limit threshold on output power. If dot3ExtPkgOptIfOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading will present the threshold value. Writing will set the value of the threshold. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgOptIfLowerOutputPowerThreshold can lead to a Threshold Crossing Alert (TCA) being sent for the respective interface. This alert may be leading to an interruption of service for the users connected to the respective EPON interface, depending on the system action on such an alert. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface.
What is dot3ExtPkgOptIfLowerOutputPowerThreshold?
This read-write value sets the lower output-power alarm threshold, in 0.1 dBm units; when dot3ExtPkgOptIfOutputPower drops to or below it, a Threshold Crossing Alert should be raised. It flags a laser that is degrading and putting out less power than expected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.155.1.4.1.5.1.10 snmpwalk -v2c -c public <target> DOT3-EPON-MIB::dot3ExtPkgOptIfLowerOutputPowerThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.155.1.4.1.5.1.10.1 snmpget -v2c -c public <target> DOT3-EPON-MIB::dot3ExtPkgOptIfLowerOutputPowerThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.155.1.4.1.5.1.10.1 i <value>
Start monitoring EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT3-EPON-MIB::dot3ExtPkgOptIfLowerOutputPowerThreshold OID value, configure state conditions and alerts, and monitor any EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.155 | dot3EponMIB | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1 | dot3EponObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4 | dot3ExtPkgObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1 | dot3ExtPkgControlObjects | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5 | dot3ExtPkgOptIfTable | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5.1 | dot3ExtPkgOptIfEntry | DOT3-EPON-MIB |
| 1.3.6.1.2.1.155.1.4.1.5.1.10 | dot3ExtPkgOptIfLowerOutputPowerThreshold | DOT3-EPON-MIB |