DOT3-EPON-MIB :: dot3EponFecPCSCodingViolation

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOT3-EPON-MIBdot3EponFecPCSCodingViolation

dot3EponFecPCSCodingViolation

Module: DOT3-EPON-MIB

OID (symbolic): DOT3-EPON-MIB::dot3EponFecPCSCodingViolation

OID (numeric): 1.3.6.1.2.1.155.1.3.1.1.1

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: For a 100 Mbps operation, it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For a 1000 Mbps operation, it is a count of the number of times an invalid codegroup is received, other than the /V/ code-group. /H/ denotes a special 4b5b codeword of [802.3] 100 Mbps PCS layer (clause 24), and /V/ denotes a special 8b10b codeword of the [802.3] 1000 Mbps PCS layer (clause 36). This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. Discontinuities of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of the ifCounterDiscontinuityTime object of the Interface MIB module.

What is dot3EponFecPCSCodingViolation?

This counts invalid PCS code-groups received (other than the expected /H/ or /V/ special codewords, depending on 100Mbps or 1000Mbps operation), unaffected by whether FEC is enabled. Rising counts indicate raw physical-layer signal problems on the optical link independent of any forward-error-correction setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.155.1.3.1.1.1
snmpwalk -v2c -c public <target> DOT3-EPON-MIB::dot3EponFecPCSCodingViolation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.155.1.3.1.1.1.1
snmpget -v2c -c public <target> DOT3-EPON-MIB::dot3EponFecPCSCodingViolation.1

Start monitoring EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT3-EPON-MIB::dot3EponFecPCSCodingViolation OID value, configure state conditions and alerts, and monitor any EPON OLT/ONU (802.3ah EPON MPCP, vendor-neutral IEEE standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.155dot3EponMIBDOT3-EPON-MIB
1.3.6.1.2.1.155.1dot3EponObjectsDOT3-EPON-MIB
1.3.6.1.2.1.155.1.3dot3EponFecObjectsDOT3-EPON-MIB
1.3.6.1.2.1.155.1.3.1dot3EponFecTableDOT3-EPON-MIB
1.3.6.1.2.1.155.1.3.1.1dot3EponFecEntryDOT3-EPON-MIB
1.3.6.1.2.1.155.1.3.1.1.1dot3EponFecPCSCodingViolationDOT3-EPON-MIB