All MIBs › DOCS-QOS-MIB › docsQosPktClassEnetProtocol
docsQosPktClassEnetProtocol
Module: DOCS-QOS-MIB
OID (symbolic): DOCS-QOS-MIB::docsQosPktClassEnetProtocol
OID (numeric): 1.3.6.1.2.1.10.127.7.1.1.1.20
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: If docsQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule.
If dosQosPktClassEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule.
If docsQosPktClassEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule.
If docsQosPktClassEnetProtocolType is mac(3), the lower 8 bits of this object value represent a lower bound (inclusive) of MAC management message type codes matched, and the upper 8 bits of this object value represent the upper bound (inclusive) of matched MAC message type codes. Certain message type codes are excluded from matching, as specified in the reference.
If the Ethernet frame contains an 802.1P/Q Tag header (i.e. EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header.
If the referenced parameter is not present in the classifier, the value of this object is reported as 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.1.1.20 snmpwalk -v2c -c public <target> DOCS-QOS-MIB::docsQosPktClassEnetProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.1.1.20.1 snmpget -v2c -c public <target> DOCS-QOS-MIB::docsQosPktClassEnetProtocol.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS-MIB::docsQosPktClassEnetProtocol OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.7 | docsQosMIB | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1 | docsQosMIBObjects | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.1 | docsQosPktClassTable | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.1.1 | docsQosPktClassEntry | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.1.1.20 | docsQosPktClassEnetProtocol | DOCS-QOS-MIB |