DOCS-QOS-MIB :: docsQosParamSetUnsolicitGrantSize

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOCS-QOS-MIBdocsQosParamSetUnsolicitGrantSize

docsQosParamSetUnsolicitGrantSize

Module: DOCS-QOS-MIB

OID (symbolic): DOCS-QOS-MIB::docsQosParamSetUnsolicitGrantSize

OID (numeric): 1.3.6.1.2.1.10.127.7.1.2.1.17

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Specifies the unsolicited grant size in bytes. The grant size includes the entire MAC frame data PDU from the Frame Control byte to end of the MAC frame.

The referenced parameter is applicable only for upstream flows with a SchedulingType of of unsolicitedGrantServicewithAD(5) or unsolicitedGrantService(6), and is mandatory when applicable. Both CMTS and CM report the signaled value of the parameter in this case.

If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this object's value as 0.

What is docsQosParamSetUnsolicitGrantSize?

Fixed size in bytes of each unsolicited upstream grant for service flows using unsolicited-grant scheduling, mandatory when applicable and reported as 0 for other scheduling types. This tells an admin the per-grant capacity a UGS voice flow, for example, has been provisioned with.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.17
snmpwalk -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetUnsolicitGrantSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.17.1
snmpget -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetUnsolicitGrantSize.1

Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS-MIB::docsQosParamSetUnsolicitGrantSize OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.127docsIfMibDOCS-IETF-RFI-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.127.7docsQosMIBDOCS-QOS-MIB
1.3.6.1.2.1.10.127.7.1docsQosMIBObjectsDOCS-QOS-MIB
1.3.6.1.2.1.10.127.7.1.2docsQosParamSetTableDOCS-QOS-MIB
1.3.6.1.2.1.10.127.7.1.2.1docsQosParamSetEntryDOCS-QOS-MIB
1.3.6.1.2.1.10.127.7.1.2.1.17docsQosParamSetUnsolicitGrantSizeDOCS-QOS-MIB