All MIBs › DOCS-QOS-MIB › docsQosParamSetTolPollJitter
docsQosParamSetTolPollJitter
Module: DOCS-QOS-MIB
OID (symbolic): DOCS-QOS-MIB::docsQosParamSetTolPollJitter
OID (numeric): 1.3.6.1.2.1.10.127.7.1.2.1.16
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic schedule on an upstream service flow.
This parameter is applicable only to upstream service flows with a Schedulingtype of realTimePollingService(4) or unsolictedGrantServiceWithAD(5).
If the referenced parameter is applicable but not present in the corresponding DOCSIS QOS Parameter Set, the CMTS uses an implementation dependent value and reports the value it is using. The CM reports a value of 0 in this case.
If the parameter is not applicable to the direction or upstream scheduling type of the service flow, both CMTS and CM report this object's value as 0.
What is docsQosParamSetTolPollJitter?
Maximum allowed delay, in microseconds, of unicast polling opportunities from their nominal schedule for real-time or grant-with-AD upstream flows; reports 0 when not applicable to this flow's direction or scheduling type. Admins use it alongside docsQosParamSetNomPollInterval to gauge how much jitter tolerance a CMTS is allowing for a latency-sensitive upstream service.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.16 snmpwalk -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetTolPollJitter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.16.1 snmpget -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetTolPollJitter.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS-MIB::docsQosParamSetTolPollJitter OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.7 | docsQosMIB | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1 | docsQosMIBObjects | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2 | docsQosParamSetTable | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1 | docsQosParamSetEntry | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1.16 | docsQosParamSetTolPollJitter | DOCS-QOS-MIB |