All MIBs › DOCS-QOS-MIB › docsQosParamSetMaxTrafficRate
docsQosParamSetMaxTrafficRate
Module: DOCS-QOS-MIB
OID (symbolic): DOCS-QOS-MIB::docsQosParamSetMaxTrafficRate
OID (numeric): 1.3.6.1.2.1.10.127.7.1.2.1.6
Node type: OBJECT-TYPE
Type: BitRate
Access: read-only
Description: Maximum sustained traffic rate allowed for this service flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited during any time interval. The value 0 means no maximum traffic rate is enforced. This object applies to both upstream and downstream service flows.
If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is 0. If the parameter is not applicable, it is reported as 0.
What is docsQosParamSetMaxTrafficRate?
Maximum sustained traffic rate in bits per second enforced on this QoS parameter set (service flow), counted from the MAC frame header through the CRC; a value of 0 means no cap is enforced. Admins set or read this to confirm bandwidth caps, e.g. a 10,000,000 value capping a downstream flow at 10 Mbps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.6 snmpwalk -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetMaxTrafficRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.6.1 snmpget -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetMaxTrafficRate.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS-MIB::docsQosParamSetMaxTrafficRate OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.7 | docsQosMIB | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1 | docsQosMIBObjects | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2 | docsQosParamSetTable | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1 | docsQosParamSetEntry | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1.6 | docsQosParamSetMaxTrafficRate | DOCS-QOS-MIB |