All MIBs › DOCS-QOS-MIB › docsQosParamSetMaxTrafficBurst
docsQosParamSetMaxTrafficBurst
Module: DOCS-QOS-MIB
OID (symbolic): DOCS-QOS-MIB::docsQosParamSetMaxTrafficBurst
OID (numeric): 1.3.6.1.2.1.10.127.7.1.2.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. This object is applied in conjunction with docsQosParamSetMaxTrafficRate to calculate maximum sustained traffic rate.
If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object for scheduling types bestEffort (2), nonRealTimePollingService(3), and realTimePollingService(4) is 1522.
If this parameter is not applicable, it is reported as 0.
What is docsQosParamSetMaxTrafficBurst?
Token-bucket burst size in bytes associated with this parameter set's traffic-rate policing, used together with docsQosParamSetMaxTrafficRate; unsignaled best-effort/polling flows default to 1522 bytes (about one max-size Ethernet frame). Raising this value lets short bursts exceed the sustained rate briefly before shaping kicks in.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.7 snmpwalk -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetMaxTrafficBurst
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.7.1 snmpget -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetMaxTrafficBurst.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS-MIB::docsQosParamSetMaxTrafficBurst OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.7 | docsQosMIB | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1 | docsQosMIBObjects | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2 | docsQosParamSetTable | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1 | docsQosParamSetEntry | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1.7 | docsQosParamSetMaxTrafficBurst | DOCS-QOS-MIB |