All MIBs › DOCS-QOS-MIB › docsQosParamSetGrantsPerInterval
docsQosParamSetGrantsPerInterval
Module: DOCS-QOS-MIB
OID (symbolic): DOCS-QOS-MIB::docsQosParamSetGrantsPerInterval
OID (numeric): 1.3.6.1.2.1.10.127.7.1.2.1.20
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Specifies the number of data grants per Nominal Grant Interval (docsQosParamSetNomGrantInterval).
The referenced parameter is applicable only for upstream flows with a SchedulingType of of unsolicitedGrantServicewithAD(5) or unsolicitedGrantService(6), and is mandatory when applicable. Both CMTS and CM report the signaled value of the parameter in this case.
If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this object's value as 0.
What is docsQosParamSetGrantsPerInterval?
Number of unsolicited data grants issued per docsQosParamSetNomGrantInterval for grant-based upstream service flows, reported as 0 when not applicable. Admins use it with the grant interval and size to compute the effective upstream bandwidth a UGS flow (like a VoIP call) has been allocated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.20 snmpwalk -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetGrantsPerInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.7.1.2.1.20.1 snmpget -v2c -c public <target> DOCS-QOS-MIB::docsQosParamSetGrantsPerInterval.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS-MIB::docsQosParamSetGrantsPerInterval OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.7 | docsQosMIB | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1 | docsQosMIBObjects | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2 | docsQosParamSetTable | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1 | docsQosParamSetEntry | DOCS-QOS-MIB |
| 1.3.6.1.2.1.10.127.7.1.2.1.20 | docsQosParamSetGrantsPerInterval | DOCS-QOS-MIB |