All MIBs › DOCS-IF31-MIB › docsIf31CmEmDlsStatsTotalDuration
docsIf31CmEmDlsStatsTotalDuration
Module: DOCS-IF31-MIB
OID (symbolic): DOCS-IF31-MIB::docsIf31CmEmDlsStatsTotalDuration
OID (numeric): 1.3.6.1.4.1.4491.2.1.28.1.16.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute indicates the total time duration, in seconds since registration, the CM has been in Energy Management DLS mode, as controlled by the DBC-REQ Energy Management DLS Mode Indicator TLV. This attribute differs from docsIf31CmEmDlsStatsTotalDurationBelowUsDsThrshlds because it is dependent on effects of the Energy Management Cycle Period, and processing of EM-REQ/EM-RSP messages and DBC messages that specifically indicate entry into or exit from Energy Management DLS mode.
What is docsIf31CmEmDlsStatsTotalDuration?
Reports, in seconds since registration, the total time this modem has actually spent in Energy Management DLS (Deep Sleep) mode, as governed by the DBC-REQ Energy Management DLS Mode Indicator TLV; this differs from docsIf31CmEmDlsStatsTotalDurationBelowUsDsThrshlds because it reflects real DLS entry/exit driven by the Energy Management Cycle Period and EM-REQ/EM-RSP/DBC message processing, not just whether traffic conditions were eligible. This is the practical, real-world DLS duration admins should use when auditing actual power-saving time versus the theoretical eligibility windows in the threshold-based counters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.28.1.16.1.3 snmpwalk -v2c -c public <target> DOCS-IF31-MIB::docsIf31CmEmDlsStatsTotalDuration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.28.1.16.1.3.1 snmpget -v2c -c public <target> DOCS-IF31-MIB::docsIf31CmEmDlsStatsTotalDuration.1
Start monitoring DOCSIS 3.1 cable modem/CMTS-CCAP (OFDM/OFDMA channels, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IF31-MIB::docsIf31CmEmDlsStatsTotalDuration OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS-CCAP (OFDM/OFDMA channels, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.28 | docsIf31Mib | DOCS-IF31-MIB |
| 1.3.6.1.4.1.4491.2.1.28.1 | docsIf31MibObjects | DOCS-IF31-MIB |
| 1.3.6.1.4.1.4491.2.1.28.1.16 | docsIf31CmEmDlsStatsTable | DOCS-IF31-MIB |
| 1.3.6.1.4.1.4491.2.1.28.1.16.1 | docsIf31CmEmDlsStatsEntry | DOCS-IF31-MIB |
| 1.3.6.1.4.1.4491.2.1.28.1.16.1.3 | docsIf31CmEmDlsStatsTotalDuration | DOCS-IF31-MIB |