All MIBs › DOCS-IF-M-CMTS-MIB › docsIfMCmtsEqamGlobCfgDownInterleave
docsIfMCmtsEqamGlobCfgDownInterleave
Module: DOCS-IF-M-CMTS-MIB
OID (symbolic): DOCS-IF-M-CMTS-MIB::docsIfMCmtsEqamGlobCfgDownInterleave
OID (numeric): 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The object for global configuration of Downstream channel interleave of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex. A set to this object is reflected in docsIfDownChannelInterleave of the QAM channels being set. Values are defined as follows: 64QAM/256QAM 'taps8Increment16' : protection 5.9/4.1 usec, latency .22/.15 msec 'taps16Increment8' : protection 12/8.2 usec, latency .48/.33 msec 'taps32Increment4' : protection 24/16 usec, latency .98/.68 msec 'taps64Increment2' : protection 47/33 usec, latency 2/1.4 msec 'taps128Increment1' : protection 95/66 usec, latency 4/2.8 msec 'taps12increment17' : protection 18/14 usec, latency 0.43/0.32 msec
Values below are not defined for DOCSIS RFI MIB for docsIfDownChannelInterleave. The EQAM Channel supports these values for video services (see docsIfMCmtsEqamDownstreamCapabInterleaver specific EQAM supported values).
'tabs128increment2' : protection 190/132 usec, latency 8/5.6 msec 'tabs128increment3' : protection 285/198 usec, latency 12/8.4 msec 'tabs128increment4' : protection 379/264 usec, latency 16/11 msec 'tabs128increment5' : protection 474/330 usec, latency 20/14 msec 'tabs128increment6' : protection 569/396 usec, latency 24/17 msec 'tabs128increment7' : protection 664/462 usec, latency 28/19 msec 'tabs128increment8' : protection 759/528 usec, latency 32/22 msec
Setting this object without setting docsIfMCmtsEqamGlogCfgDownAnnex may end up with particular QAM channels set rejections due to incompatible Annex parameters, in which case the error 'errorSetFailures' is reported in docsIfMCmtsEqamGlobCfgDownExecutionCode.
What is docsIfMCmtsEqamGlobCfgDownInterleave?
Selects an interleaver profile (from 'unknown'/'other' through named tap/increment combinations like taps128Increment1, each with a documented protection-vs-latency tradeoff) to bulk-apply to all downstream channels under this row's physical index. An operator picks a heavier interleave (more protection, more latency) for a noisy plant segment, or a lighter one for latency-sensitive services, and pushes it to a whole card at once; note it warns that skipping the matching Annex object can cause per-channel set failures.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.6 | docsIfMCmtsMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1 | docsIfMCmtsObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3 | docsIfMCmtsEqamObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4 | docsIfMCmtsEqamGlobCfgDownTable | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1 | docsIfMCmtsEqamGlobCfgDownEntry | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.6 | docsIfMCmtsEqamGlobCfgDownInterleave | DOCS-IF-M-CMTS-MIB |