All MIBs › DOCS-IF-M-CMTS-MIB › docsIfMCmtsDepiSessionInfoRsrcAllocResp
docsIfMCmtsDepiSessionInfoRsrcAllocResp
Module: DOCS-IF-M-CMTS-MIB
OID (symbolic): DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionInfoRsrcAllocResp
OID (numeric): 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: In the M-CMTS core a reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable as reported by the EQAM during the DEPI session establishment process.
The number of PHBIDs in the entries referenced in docsIfMCmtsDepiSessionConfigRsrcAllocReq and this object may differ if the EQAM Host IP signals a partial list of PBHIDs during the DEPI session establishment.
In the EQAM a value 0 indicates no reference to docsIfMCmtsDepiRsrcAllocTable. A non-zero value indicates the value of docsIfMCmtsDepiRsrcAllocIndex in docsIfMCmtsDepiRsrcAllocTable as being signaled by the EQAM to the M-CMTS Core.
What is docsIfMCmtsDepiSessionInfoRsrcAllocResp?
On the M-CMTS Core, references the docsIfMCmtsDepiRsrcAllocTable entry the EQAM actually reported back during session setup (which may list fewer PHBIDs than were requested if the EQAM only partially honored the request); on the EQAM, 0 means no allocation reference and a non-zero value points to the table entry it signaled to the Core. An admin compares this against the original request object to spot cases where the EQAM granted only a subset of the requested per-hop-behavior resources.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.6 snmpwalk -v2c -c public <target> DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionInfoRsrcAllocResp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.6.1 snmpget -v2c -c public <target> DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionInfoRsrcAllocResp.1
Start monitoring M-CMTS core + EQAM device (Modular CMTS DEPI, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionInfoRsrcAllocResp OID value, configure state conditions and alerts, and monitor any M-CMTS core + EQAM device (Modular CMTS DEPI, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.6 | docsIfMCmtsMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1 | docsIfMCmtsObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4 | docsIfMCmtsDepiObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1 | docsIfMCmtsDepiSessionObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2 | docsIfMCmtsDepiSessionInfoTable | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1 | docsIfMCmtsDepiSessionInfoEntry | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.6 | docsIfMCmtsDepiSessionInfoRsrcAllocResp | DOCS-IF-M-CMTS-MIB |