All MIBs › DOCS-IF-M-CMTS-MIB › docsIfMCmtsDepiSessionCinLatencyInterval
docsIfMCmtsDepiSessionCinLatencyInterval
Module: DOCS-IF-M-CMTS-MIB
OID (symbolic): DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionCinLatencyInterval
OID (numeric): 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The time interval used to measure periodically the CIN latency per DEPI session. Active measurement of CIN latency applies to active DEPI sessions only. This object is constrained to 420 seconds to prevent the Master Clock counter overruns. A value zero indicates no CIN latency measurements to be performed.
What is docsIfMCmtsDepiSessionCinLatencyInterval?
Sets, in seconds (0-420), how often the CIN (Converged Interconnect Network) latency is measured for active DEPI sessions; 0 disables the measurement entirely, and the 420-second cap exists to avoid overrunning the master clock counter. An admin enables periodic latency measurement here to keep an eye on network delay between the M-CMTS Core and the EQAM devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.1 snmpwalk -v2c -c public <target> DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionCinLatencyInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.1.1 snmpget -v2c -c public <target> DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionCinLatencyInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.1.1 i <value>
Start monitoring M-CMTS core + EQAM device (Modular CMTS DEPI, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IF-M-CMTS-MIB::docsIfMCmtsDepiSessionCinLatencyInterval OID value, configure state conditions and alerts, and monitor any M-CMTS core + EQAM device (Modular CMTS DEPI, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.6 | docsIfMCmtsMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1 | docsIfMCmtsObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4 | docsIfMCmtsDepiObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1 | docsIfMCmtsDepiSessionObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5 | docsIfMCmtsDepiSessionCinLatency | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.1 | docsIfMCmtsDepiSessionCinLatencyInterval | DOCS-IF-M-CMTS-MIB |