All MIBs › DOCS-IF-M-CMTS-MIB › docsIfMCmtsChannelBlockCfgNumberChannels
docsIfMCmtsChannelBlockCfgNumberChannels
Module: DOCS-IF-M-CMTS-MIB
OID (symbolic): DOCS-IF-M-CMTS-MIB::docsIfMCmtsChannelBlockCfgNumberChannels
OID (numeric): 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The Number of QAM Channels N' to configure for the QAM block. The maximum number of channels per block follows the consideration of maximum number of digital channels in a headend described in the DRFI specification. As a rule N' is valid if is less or equal to N. In addition N minimal requirements consist of even numbers and 1 (one QAM channel per Block Channel). Odd number of QAM channels per Block Channel are of optional implementation. A Set to an invalid value or not supported value returns Error 'wrongValue'.
What is docsIfMCmtsChannelBlockCfgNumberChannels?
Lets an admin request how many QAM channels (N', 1-119) should actually be configured within this channel block, subject to it being less than or equal to the hardware's real channel count N and to even-number/optional-odd rules from the DRFI spec. Requesting an unsupported or too-large value returns 'wrongValue', so this is typically used to shrink an active block down for maintenance or capacity planning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3 snmpwalk -v2c -c public <target> DOCS-IF-M-CMTS-MIB::docsIfMCmtsChannelBlockCfgNumberChannels
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3.1 snmpget -v2c -c public <target> DOCS-IF-M-CMTS-MIB::docsIfMCmtsChannelBlockCfgNumberChannels.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3.1 i <value>
Start monitoring M-CMTS core + EQAM device (Modular CMTS DEPI, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IF-M-CMTS-MIB::docsIfMCmtsChannelBlockCfgNumberChannels OID value, configure state conditions and alerts, and monitor any M-CMTS core + EQAM device (Modular CMTS DEPI, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.6 | docsIfMCmtsMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1 | docsIfMCmtsObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3 | docsIfMCmtsEqamObjects | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5 | docsIfMCmtsChannelBlockTable | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1 | docsIfMCmtsChannelBlockEntry | DOCS-IF-M-CMTS-MIB |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3 | docsIfMCmtsChannelBlockCfgNumberChannels | DOCS-IF-M-CMTS-MIB |