All MIBs › DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB › docsDevCmtsDynServAckFailNotif
docsDevCmtsDynServAckFailNotif
Module: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB
OID (symbolic): DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmtsDynServAckFailNotif
OID (numeric): 1.3.6.1.2.1.132.3.0.6
Node type: NOTIFICATION-TYPE
Description: A notification to report the failure of a dynamic service acknowledgement during the dynamic services process that was detected by the CMTS.
This notification sends additional information about the event by including the following objects in its
varbinding list. - docsDevEvLevel: the priority level associated with the event. - docsDevEvId: the unique identifier of the event that occurred. - docsDevEvText: a textual description of the event. - docsIfCmtsCmStatusMacAddress: the MAC address of the CM with which this notification is associated. - ifPhysAddress: the MAC address of the CMTS (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface that connected to the CM) cable interface connected to the CM. - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1) that the reporting CM is operating in. - docsIfDocsisBaseCapability: the highest version of the DOCSIS specification (1.0, 1.1, 2.0) that the device is capable of supporting. - docsIfCmtsCmStatusModulationType: the upstream modulation methodology used by the CM.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmtsDynServAckFailNotif snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.132.3.0.6
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:51466->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (354892554) 41 days, 1:48:45.54 SNMPv2-MIB::snmpTrapOID.0 = OID: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmtsDynServAckFailNotif
Start monitoring Cable modem/CMTS (DOCSIS notification control, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmtsDynServAckFailNotif OID value, configure state conditions and alerts, and monitor any Cable modem/CMTS (DOCSIS notification control, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.132 | docsDevNotifMIB | DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB |
| 1.3.6.1.2.1.132.3.0 | docsDevCmtsNotifs | DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB |
| 1.3.6.1.2.1.132.3.0.6 | docsDevCmtsDynServAckFailNotif | DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB |