All MIBs › DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB › docsDevCmSwUpgradeInitNotif
docsDevCmSwUpgradeInitNotif
Module: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB
OID (symbolic): DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmSwUpgradeInitNotif
OID (numeric): 1.3.6.1.2.1.132.2.0.9
Node type: NOTIFICATION-TYPE
Description: A notification to indicate that a software upgrade has been initiated on the device.
This notification sends additional information about the event by including the following objects in its varbinding list. - docsDevEvLevel: the priority level associated with the event. - docsDevEvId: the unique identifier of the event that occurred. - docsDevEvText: a textual description of the event. - ifPhysAddress: the MAC address of the cable interface of this cable modem. - docsIfCmCmtsAddress: the MAC address of the CMTS to which the CM is connected (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface to which it is connected). - docsIfDocsisBaseCapability: the highest version of the DOCSIS specification (1.0, 1.1, 2.0) that the device is capable of supporting. - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1) that the CM is operating in. - docsIfCmStatusModulationType: the upstream modulation methodology used by the CM.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmSwUpgradeInitNotif snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.132.2.0.9
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:64811->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (170427179) 19 days, 17:24:31.79 SNMPv2-MIB::snmpTrapOID.0 = OID: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmSwUpgradeInitNotif
Start monitoring Cable modem/CMTS (DOCSIS notification control, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB::docsDevCmSwUpgradeInitNotif OID value, configure state conditions and alerts, and monitor any Cable modem/CMTS (DOCSIS notification control, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.132 | docsDevNotifMIB | DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB |
| 1.3.6.1.2.1.132.2.0 | docsDevCmNotifs | DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB |
| 1.3.6.1.2.1.132.2.0.9 | docsDevCmSwUpgradeInitNotif | DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB |