All MIBs › DOCS-DRF-MIB › docsDrfChannelBlockTestIfIndex
docsDrfChannelBlockTestIfIndex
Module: DOCS-DRF-MIB
OID (symbolic): DOCS-DRF-MIB::docsDrfChannelBlockTestIfIndex
OID (numeric): 1.3.6.1.4.1.4491.2.1.23.1.5.1.6
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-write
Description: The ifIndex of the QAM channel to perform the QAM channel test. A Set to a value that does not correspond to a QAM Channel within the Block channel returns error 'wrongValue'. A set to zero stops a current test execution.
What is docsDrfChannelBlockTestIfIndex?
This read-write InterfaceIndexOrZero value identifies which QAM channel within a channel block is the target of the test mode set in docsDrfChannelBlockTestType. A technician sets this to the ifIndex of the specific channel to test before triggering a test mode, and sets it back to zero to stop an active test. Setting this to ifIndex 12 (a QAM channel within the block) followed by docsDrfChannelBlockTestType set to allOff would target that test scope; supplying an ifIndex not belonging to the block returns a wrongValue error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.23.1.5.1.6 snmpwalk -v2c -c public <target> DOCS-DRF-MIB::docsDrfChannelBlockTestIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.23.1.5.1.6.1 snmpget -v2c -c public <target> DOCS-DRF-MIB::docsDrfChannelBlockTestIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.23.1.5.1.6.1 s <value>
Start monitoring CMTS/cable headend edge device (Downstream RF Interface, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-DRF-MIB::docsDrfChannelBlockTestIfIndex OID value, configure state conditions and alerts, and monitor any CMTS/cable headend edge device (Downstream RF Interface, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.23 | docsDrfMib | DOCS-DRF-MIB |
| 1.3.6.1.4.1.4491.2.1.23.1 | docsDrfObjects | DOCS-DRF-MIB |
| 1.3.6.1.4.1.4491.2.1.23.1.5 | docsDrfChannelBlockTable | DOCS-DRF-MIB |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1 | docsDrfChannelBlockEntry | DOCS-DRF-MIB |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.6 | docsDrfChannelBlockTestIfIndex | DOCS-DRF-MIB |