DLSW-MIB :: dlswTrapCntlTConnPartnerReject

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDLSW-MIBdlswTrapCntlTConnPartnerReject

dlswTrapCntlTConnPartnerReject

Module: DLSW-MIB

OID (symbolic): DLSW-MIB::dlswTrapCntlTConnPartnerReject

OID (numeric): 1.3.6.1.2.1.46.1.1.10.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates whether the DLSw is permitted to emit partner reject related traps. With the value of `enabled' the DLSw will emit all partner reject related traps. With the value of `disabled' the DLSw will not emit any partner reject related traps. With the value of `partial' the DLSw will only emits partner reject traps for CapEx reject. The changes take effect immediately.

What is dlswTrapCntlTConnPartnerReject?

Controls whether this DLSw node emits partner-reject-related traps: enabled sends all such traps, disabled suppresses them, and partial restricts emission to only CapEx (capabilities exchange) reject events. An admin tunes this to reduce trap noise while still being alerted to the specific reject conditions they care about, and changes take effect immediately.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.46.1.1.10.1
snmpwalk -v2c -c public <target> DLSW-MIB::dlswTrapCntlTConnPartnerReject

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.46.1.1.10.1.1
snmpget -v2c -c public <target> DLSW-MIB::dlswTrapCntlTConnPartnerReject.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.46.1.1.10.1.1 i <value>

Start monitoring Router/gateway running Data Link Switching (vendor-neutral, legacy SNA/NetBIOS over IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLSW-MIB::dlswTrapCntlTConnPartnerReject OID value, configure state conditions and alerts, and monitor any Router/gateway running Data Link Switching (vendor-neutral, legacy SNA/NetBIOS over IP) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.46dlswDLSW-MIB
1.3.6.1.2.1.46.1dlswMIBDLSW-MIB
1.3.6.1.2.1.46.1.1dlswNodeDLSW-MIB
1.3.6.1.2.1.46.1.1.10dlswTrapControlDLSW-MIB
1.3.6.1.2.1.46.1.1.10.1dlswTrapCntlTConnPartnerRejectDLSW-MIB