DLM-MIB :: snmpPollAlarmWait

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DLM-MIB › snmpPollAlarmWait

snmpPollAlarmWait

Module: DLM-MIB

OID (symbolic): DLM-MIB::snmpPollAlarmWait

OID (numeric): 1.3.6.1.4.1.52.4.2.1.1.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates the number of seconds to wait prior to sending another alarm. This is to ensure that alarms do not flood out upon device contact lost.

What is snmpPollAlarmWait?

How many seconds the DLM waits before it will send another alarm for this poll entry, preventing alarm floods while a destination remains unreachable; defaults to 60 seconds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.1.1.1.13
snmpwalk -v2c -c public <target> DLM-MIB::snmpPollAlarmWait

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.1.1.1.13.1
snmpget -v2c -c public <target> DLM-MIB::snmpPollAlarmWait.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.1.1.1.13.1 i <value>

Start monitoring Cabletron Systems network device (SNMP polling watchdog subsystem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLM-MIB::snmpPollAlarmWait OID value, configure state conditions and alerts, and monitor any Cabletron Systems network device (SNMP polling watchdog subsystem) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.2ctronExpCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.2.1ctronDLMCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.1.1snmpPollTableDLM-MIB
1.3.6.1.4.1.52.4.2.1.1.1snmpPollEntryDLM-MIB
1.3.6.1.4.1.52.4.2.1.1.1.13snmpPollAlarmWaitDLM-MIB