DLINKSW-STORM-CTRL-MIB :: dStormCtrlTrafficInfoStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DLINKSW-STORM-CTRL-MIB › dStormCtrlTrafficInfoStatus

dStormCtrlTrafficInfoStatus

Module: DLINKSW-STORM-CTRL-MIB

OID (symbolic): DLINKSW-STORM-CTRL-MIB::dStormCtrlTrafficInfoStatus

OID (numeric): 1.3.6.1.4.1.171.26.25.1.4.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the current status of storm control on a given interface for a given traffic type. forwarding(1): no storm event has been detected. dropped(2): a storm event has occurred and the storm traffic exceeding the threshold is dropped. errorDisabled(3): the port is disabled due to a storm. linkDown(4): the port is physically linked down. inactive(5): Indicates that storm control is not enabled for the given traffic type.

What is dStormCtrlTrafficInfoStatus?

This enumerated value reports the current storm-control state of a given traffic type on an interface. Admins check it to quickly see whether a port is normally forwarding, actively dropping storm traffic, has been error-disabled by a storm, is simply down, or has storm control inactive for that type. A value of errorDisabled(3) tells the admin the port was shut down due to a sustained storm and needs manual or auto-recovery intervention.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.25.1.4.1.3
snmpwalk -v2c -c public <target> DLINKSW-STORM-CTRL-MIB::dStormCtrlTrafficInfoStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.25.1.4.1.3.1
snmpget -v2c -c public <target> DLINKSW-STORM-CTRL-MIB::dStormCtrlTrafficInfoStatus.1

Start monitoring D-Link switching equipment (storm control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-STORM-CTRL-MIB::dStormCtrlTrafficInfoStatus OID value, configure state conditions and alerts, and monitor any D-Link switching equipment (storm control) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.26dlinkIndustrialCommonDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.26.25dlinkSwStormCtrlMIBDLINKSW-STORM-CTRL-MIB
1.3.6.1.4.1.171.26.25.1dStormCtrlMIBObjectsDLINKSW-STORM-CTRL-MIB
1.3.6.1.4.1.171.26.25.1.4dStormCtrlTrafficInfoTableDLINKSW-STORM-CTRL-MIB
1.3.6.1.4.1.171.26.25.1.4.1dStormCtrlTrafficInfoEntryDLINKSW-STORM-CTRL-MIB
1.3.6.1.4.1.171.26.25.1.4.1.3dStormCtrlTrafficInfoStatusDLINKSW-STORM-CTRL-MIB