All MIBs › DLINKSW-STORM-CTRL-MIB › dStormCtrlNotifyEnable
dStormCtrlNotifyEnable
Module: DLINKSW-STORM-CTRL-MIB
OID (symbolic): DLINKSW-STORM-CTRL-MIB::dStormCtrlNotifyEnable
OID (numeric): 1.3.6.1.4.1.171.26.25.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls when a storm control notification will be generated.
If the object is set to none(1): No notifications will be generated. stormOccurred(2): A notification will be generated when a storm event is detected. stormCleared(3): A notification will be generated when a storm event is cleared. both (4): A notification will be generated both when a storm event is detected and cleared. NOTE:The default value of this object is none(1).
What is dStormCtrlNotifyEnable?
This enumerated object controls when the switch generates a storm-control notification: never, only when a storm starts, only when it clears, or both. Admins set it to both(4) to get complete visibility into broadcast, multicast, or unknown-unicast storm events on monitored ports without manually polling traffic counters. Setting it to stormOccurred(2) means the switch traps only when a storm is first detected, staying silent afterward, while the default none(1) sends no notifications at all.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.25.1.1.1 snmpwalk -v2c -c public <target> DLINKSW-STORM-CTRL-MIB::dStormCtrlNotifyEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.25.1.1.1.1 snmpget -v2c -c public <target> DLINKSW-STORM-CTRL-MIB::dStormCtrlNotifyEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.25.1.1.1.1 i <value>
Start monitoring D-Link switching equipment (storm control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-STORM-CTRL-MIB::dStormCtrlNotifyEnable OID value, configure state conditions and alerts, and monitor any D-Link switching equipment (storm control) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.26 | dlinkIndustrialCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.26.25 | dlinkSwStormCtrlMIB | DLINKSW-STORM-CTRL-MIB |
| 1.3.6.1.4.1.171.26.25.1 | dStormCtrlMIBObjects | DLINKSW-STORM-CTRL-MIB |
| 1.3.6.1.4.1.171.26.25.1.1 | dStormCtrlGentrl | DLINKSW-STORM-CTRL-MIB |
| 1.3.6.1.4.1.171.26.25.1.1.1 | dStormCtrlNotifyEnable | DLINKSW-STORM-CTRL-MIB |