DLINK-3100-MAC-BASE-PRIO

All MIBs › DLINK-3100-MAC-BASE-PRIO

Category: Technology: QoS, Vendor: D-Link

Description: Manages MAC address-based priority classification for QoS traffic prioritization on D-Link 3100 series switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-3100-MAC-BASE-PRIO?

DLINK-3100-MAC-BASE-PRIO is a proprietary D-Link MIB, part of the "rl" private enterprise tree used across D-Link's Rlink-based switch software, for the DES-3100 series of managed switches. It governs MAC address-based priority forcing for QoS, letting the switch assign a forced Layer-3 Class-of-Service value to traffic matching a specific MAC address and mask rather than relying on default classification. As a configuration-oriented feature MIB its main software-status value is confirming the feature is present and enabled (via its support and version objects) and that specific force-priority rules are correctly active, rather than reporting temperature or CPU load. It sits alongside other D-Link 3100 QoS/policy MIBs (such as DLINK-3100-POLICY-MIB) as part of the same private object tree rather than depending on IETF QoS standards. It is typically deployed on D-Link DES-3100 series switches in campus or SMB wiring closets where priority treatment must be guaranteed for specific known devices. Engineers can download the DLINK-3100-MAC-BASE-PRIO file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-MAC-BASE-PRIO. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-3100 series switch

Monitoring Examples

An administrator would poll rlMacBasePrioSupport to confirm the switch software supports MAC-based priority forcing, then walk rlMacBasePrioForceL3CosTable/rlMacBasePrioForceL3CosEntry to see which MAC address/mask pairs (rlMacBasePrioForceL3CosAddress, rlMacBasePrioForceL3CosMask) have a forced CoS applied and whether each rlMacBasePrioForceL3CosRowStatus is active. Cross-referencing rlMacBasePrioForceL3CosParamsTable reveals the specific CoS parameters bound to each rule. An unexpected notInService rowStatus, or missing entries for a device that should have priority, would indicate a dropped QoS override for something like a VoIP endpoint.

What Can Be Monitored

MAC-based priority forcing support status
forced Layer-3 CoS rules by MAC address/mask
row status of priority-force entries
priority-forcing MIB/feature version

Imported Objects

From DLINK-3100-MIB

rnd	MODULE-IDENTITY

From SNMPv2-SMI

OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlMacBasePrio	1.3.6.1.4.1.171.10.94.89.89.101
INT rlMacBasePrioMibVersion	1.3.6.1.4.1.171.10.94.89.89.101.1	INTEGER	read-only	Indicates the snmp support version that is supported by this device.
OCT rlMacBasePrioSupport	1.3.6.1.4.1.171.10.94.89.89.101.2	OCTET STRING	read-only	indicates which features of the max base prio are supported: (bit 0 is the most significant bit) bit 0 - ForceL3Cos bit 1 - SADA_TC
INT rlMacBasePrioForceL3CosEnable	1.3.6.1.4.1.171.10.94.89.89.101.3	INTEGER	read-write	This variable controlls the activation of ForceL3Cos feature in Mac base priority
rlMacBasePrioForceL3CosTable	1.3.6.1.4.1.171.10.94.89.89.101.4		not-accessible	A table that contains information about ranges of addresses that are used in the mac based ptiority with the ForceL3Cos feature.
rlMacBasePrioForceL3CosEntry	1.3.6.1.4.1.171.10.94.89.89.101.4.1		not-accessible	Information about ranges of MAC addresses that are used in the mac based priority with the ForeL3Cos feature
MAC rlMacBasePrioForceL3CosAddress	1.3.6.1.4.1.171.10.94.89.89.101.4.1.1	MacAddress	read-write	The range of address of this entry. The range may not hold MAC multicast addresses.
MAC rlMacBasePrioForceL3CosMask	1.3.6.1.4.1.171.10.94.89.89.101.4.1.2	MacAddress	read-write	Indicate the mask to be logical-ANDed with the learned address before being compared to the value in the rlMacBasePrioForceL3CosAddress field.
ROW rlMacBasePrioForceL3CosRowStatus	1.3.6.1.4.1.171.10.94.89.89.101.4.1.3	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.
rlMacBasePrioForceL3CosParamsTable	1.3.6.1.4.1.171.10.94.89.89.101.5		not-accessible	The table holds the global parameters of the L3 cos :TC, UP,DSCP.
rlMacBasePrioForceL3CosParamsEntry	1.3.6.1.4.1.171.10.94.89.89.101.5.1		not-accessible
INT rlMacBasePrioForceL3CosParamsEntryIndex	1.3.6.1.4.1.171.10.94.89.89.101.5.1.1	INTEGER	read-write	Index of the ForceL3Cos parameters table.
INT rlMacBasePrioForceL3CosParamsEntryTC	1.3.6.1.4.1.171.10.94.89.89.101.5.1.2	INTEGER	read-write	The value of the globla TC
INT rlMacBasePrioForceL3CosParamsEntryUP	1.3.6.1.4.1.171.10.94.89.89.101.5.1.3	INTEGER	read-write	The value of the globla UP
INT rlMacBasePrioForceL3CosParamsEntryDSCP	1.3.6.1.4.1.171.10.94.89.89.101.5.1.4	INTEGER	read-write	The value of the globla DSCP
INT rlMacBasePrioSADATCEnable	1.3.6.1.4.1.171.10.94.89.89.101.6	INTEGER	read-write	This variable controlls the activation of SA/DA priority feature in Mac base priority
rlMacBasePrioSADATCTable	1.3.6.1.4.1.171.10.94.89.89.101.7		not-accessible	A table that contains information about ranges of addresses that are used in the mac based ptiority with the ForceL3Cos feature.
rlMacBasePrioSADATCEntry	1.3.6.1.4.1.171.10.94.89.89.101.7.1		not-accessible	Information about ranges of MAC addresses that are used in the mac based priority with the ForeL3Cos feature
MAC rlMacBasePrioSADATCAddress	1.3.6.1.4.1.171.10.94.89.89.101.7.1.1	MacAddress	read-write	The range of address of this entry. The range may not hold MAC multicast addresses.
MAC rlMacBasePrioSADATCMask	1.3.6.1.4.1.171.10.94.89.89.101.7.1.2	MacAddress	read-write	Indicate the mask to be logical-ANDed with the learned address before being compared to the value in the rlMacBasePrioSADATCAddress field.
INT rlMacBasePrioSADATCPrio	1.3.6.1.4.1.171.10.94.89.89.101.7.1.3	INTEGER	read-write	The priority that will assign to all MAC addresses that are match the range of this entry.
ROW rlMacBasePrioSADATCRowStatus	1.3.6.1.4.1.171.10.94.89.89.101.7.1.4	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.

RFC description

MAC address-based priority classification with ForceL3Cos feature for D-Link 3100 series switches.

Start monitoring D-Link DES-3100 series switch (MAC-based priority/QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-3100-MAC-BASE-PRIO

What Is DLINK-3100-MAC-BASE-PRIO?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description