All MIBs › DLGHWINF-MIB › dlgHiIdentTrapMask
dlgHiIdentTrapMask
Module: DLGHWINF-MIB
OID (symbolic): DLGHWINF-MIB::dlgHiIdentTrapMask
OID (numeric): 1.3.6.1.4.1.3028.1.1.2.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Trap Enable mask.
This variable is a bit mask which can be used to enable or disable certain enterprise specific traps.
A '1' is used to enable the trap, a '0' disables it.
Bit 0 - (1) enables Traps upon Dialogic Service Status transitions to the Stopped or Started State. Bit 1 - (1) enables Traps when a specific board Condition transitions to the Failed State. Bit 2 - (1) enables the dlgDsx1Alarm trap from the DS1 MIB. This trap indicates the beginning and end of a new alarm condition. Bit 3 - (1) enables the dlgDsx1SwEvtMskTrap trap from the DS1 MIB. This trap indicates that the DS1 Event Mask has been changed. Bit 4 - (1) enables the dlgIsdnDChanged trap from the ISDN MIB. This trap indicates the current operational status of LAPD of a particular D channel has changed Bit 5 - (1) enables the dlgIsdnBChanged trap from the DS1 MIB. This trap indicates the current operational status of LAPD of a particular B channel has changed
What is dlgHiIdentTrapMask?
This read-write integer is a bitmask an admin sets to enable or disable specific enterprise traps, such as bit 0 for service start/stop traps or bit 1 for board-failure traps, letting the admin quiet trap categories they don't want without disabling the whole MIB's alerting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3028.1.1.2.2.5 snmpwalk -v2c -c public <target> DLGHWINF-MIB::dlgHiIdentTrapMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3028.1.1.2.2.5.1 snmpget -v2c -c public <target> DLGHWINF-MIB::dlgHiIdentTrapMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3028.1.1.2.2.5.1 i <value>
Start monitoring Dialogic networking/telecom hardware platform (hardware inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLGHWINF-MIB::dlgHiIdentTrapMask OID value, configure state conditions and alerts, and monitor any Dialogic networking/telecom hardware platform (hardware inventory) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3028 | dialogic | DLGC-GLOBAL-REG |
| 1.3.6.1.4.1.3028.1 | dlgPlatform | DLGC-GLOBAL-REG |
| 1.3.6.1.4.1.3028.1.1 | dlgHardwareInfo | DLGC-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3028.1.1.2 | dlgHiComponent | DLGHWINF-MIB |
| 1.3.6.1.4.1.3028.1.1.2.2 | dlgHiIdent | DLGHWINF-MIB |
| 1.3.6.1.4.1.3028.1.1.2.2.5 | dlgHiIdentTrapMask | DLGHWINF-MIB |