All MIBs › DL80-STD-MIB › esPointName
esPointName
Module: DL80-STD-MIB
OID (symbolic): DL80-STD-MIB::esPointName
OID (numeric): 1.3.6.1.4.1.3052.7.1.1.1.1.4
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The name of the point on an EventSensor. For example,
'AC temp' (in the case of the temperature sensor on an
EventSensor).
There can be multiple points of the same point class on an
EventSensor (e.g., 8 contact closures) and multiple sensor
classes on an EventSensor (e.g., temperature, contact closure,
humidity).
If the point referenced by a given point index is solitary
(e.g., temperature sensor, because there can be only one on
an EventSensor), then this object reads as '
What is esPointName?
esPointName is the user-assigned label for a specific sensor point on an EventSensor, addressed by its point index. Admins set this so alarms and readings display a meaningful name instead of raw index numbers; for a solitary sensor class it renames the EventSensor itself, while for one of several sensors of the same class it names only that individual sensor. For example, an admin might set esPointName to "AC temp" for the lone temperature sensor on a unit, or to a channel-specific label for one of eight contact closures on the same EventSensor.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.7.1.1.1.1.4 snmpwalk -v2c -c public <target> DL80-STD-MIB::esPointName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.7.1.1.1.1.4.1 snmpget -v2c -c public <target> DL80-STD-MIB::esPointName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.7.1.1.1.1.4.1 s <value>
Start monitoring Asentria EventSensor environmental/facility monitoring device (DL80-series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL80-STD-MIB::esPointName OID value, configure state conditions and alerts, and monitor any Asentria EventSensor environmental/facility monitoring device (DL80-series) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.7 | dl80 | DL80-STD-MIB |
| 1.3.6.1.4.1.3052.7.1 | status | DL80-STD-MIB |
| 1.3.6.1.4.1.3052.7.1.1 | eventSensorStatus | DL80-STD-MIB |
| 1.3.6.1.4.1.3052.7.1.1.1 | esPointTable | DL80-STD-MIB |
| 1.3.6.1.4.1.3052.7.1.1.1.1 | esPointEntry | DL80-STD-MIB |
| 1.3.6.1.4.1.3052.7.1.1.1.1.4 | esPointName | DL80-STD-MIB |