All MIBs › DL150-STD-MIB › esIndexES
esIndexES
Module: DL150-STD-MIB
OID (symbolic): DL150-STD-MIB::esIndexES
OID (numeric): 1.3.6.1.4.1.3052.6.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The part of the point index that refers to an EventSensor.
The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point).
This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu.
For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
What is esIndexES?
This read-only value is the EventSensor-number portion of a 3-part point index, identifying which physical EventSensor (1 through 16, or 200 for the built-in one) a monitored point belongs to. An admin cares because a unit can have the internal EventSensor plus up to 16 attached external ones, and this value lets a sensor reading be mapped back to the exact physical EventSensor it came from. For example, esIndexES=200 always refers to the internal EventSensor built into the unit, while esIndexES=3 would refer to the third externally attached EventSensor as numbered during setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.6.1.1.1.1.1 snmpwalk -v2c -c public <target> DL150-STD-MIB::esIndexES
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.6.1.1.1.1.1.1 snmpget -v2c -c public <target> DL150-STD-MIB::esIndexES.1
Start monitoring Asentria SiteBoss/EventSensor environmental monitoring appliance (DL150-series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL150-STD-MIB::esIndexES OID value, configure state conditions and alerts, and monitor any Asentria SiteBoss/EventSensor environmental monitoring appliance (DL150-series) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.6 | dl150 | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.1 | status | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.1.1 | eventSensorStatus | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.1.1.1 | esPointTable | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.1.1.1.1 | esPointEntry | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.1.1.1.1.1 | esIndexES | DL150-STD-MIB |