All MIBs › DL150-STD-MIB › esIndex
esIndex
Module: DL150-STD-MIB
OID (symbolic): DL150-STD-MIB::esIndex
OID (numeric): 1.3.6.1.4.1.3052.6.2.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This number refers to an EventSensor; it has the same meaning as the esIndexES object (see above), except that this object is used only within the esTable branch.
This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu.
For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndex=2 will now refer to that particular EventSensor.
What is esIndex?
This read-only value identifies which EventSensor a row in the esTable describes, using the same numbering as esIndexES: 1 through 16 for attached EventSensors, and 200 for the built-in one. An admin cares because it's the index used to look up per-EventSensor metadata, such as name and factory ID, in the esTable, separate from the point-level esIndexES used in the point table. For example, esIndex=200 in the esTable would return the name and ID of the unit's own internal EventSensor.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.6.2.1.2.1.1 snmpwalk -v2c -c public <target> DL150-STD-MIB::esIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.6.2.1.2.1.1.1 snmpget -v2c -c public <target> DL150-STD-MIB::esIndex.1
Start monitoring Asentria SiteBoss/EventSensor environmental monitoring appliance (DL150-series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL150-STD-MIB::esIndex OID value, configure state conditions and alerts, and monitor any Asentria SiteBoss/EventSensor environmental monitoring appliance (DL150-series) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.6 | dl150 | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.2 | config | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.2.1 | eventSensorBasics | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.2.1.2 | esTable | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.2.1.2.1 | esEntry | DL150-STD-MIB |
| 1.3.6.1.4.1.3052.6.2.1.2.1.1 | esIndex | DL150-STD-MIB |