All MIBs › DIGIPDU-MIB › outSwitchCtrl
outSwitchCtrl
Module: DIGIPDU-MIB
OID (symbolic): DIGIPDU-MIB::outSwitchCtrl
OID (numeric): 1.3.6.1.4.1.10456.3.3.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This OID is provided for Outlet Status information.
'0' if the out is None.
'1' Switch Ctrl On.
'2' Switch Ctrl Off.
'3' Switch Ctrl Reboot.
'4' Switch Ctrl On Off.
What is outSwitchCtrl?
Write this object to remotely control the outlet: none(0), ctrl-on(1), ctrl-off(2), ctrl-reboot(3) or ctrl-on-off(4) -- the primary object used to remote power-cycle a device plugged into this outlet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10456.3.3.3.1.5 snmpwalk -v2c -c public <target> DIGIPDU-MIB::outSwitchCtrl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10456.3.3.3.1.5.1 snmpget -v2c -c public <target> DIGIPDU-MIB::outSwitchCtrl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10456.3.3.3.1.5.1 i <value>
Start monitoring Digi power distribution unit (PDU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DIGIPDU-MIB::outSwitchCtrl OID value, configure state conditions and alerts, and monitor any Digi power distribution unit (PDU) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10456 | digipdu | DIGIPDU-MIB |
| 1.3.6.1.4.1.10456.3 | smart | DIGIPDU-MIB |
| 1.3.6.1.4.1.10456.3.3 | peripheralTables | DIGIPDU-MIB |
| 1.3.6.1.4.1.10456.3.3.3 | outTable | DIGIPDU-MIB |
| 1.3.6.1.4.1.10456.3.3.3.1 | outEntry | DIGIPDU-MIB |
| 1.3.6.1.4.1.10456.3.3.3.1.5 | outSwitchCtrl | DIGIPDU-MIB |