All MIBs › DGS3627-L2MGMT-MIB › swDevInfoFrontPanelLedStatus
swDevInfoFrontPanelLedStatus
Module: DGS3627-L2MGMT-MIB
OID (symbolic): DGS3627-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.70.6.2.1.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.
Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks.
The second significant bit is used for link status: 1 = link fail. 2 = link pass.
Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10Gbps.
The four remaining bits are currently unused and must be 0.
What is swDevInfoFrontPanelLedStatus?
Encodes the switch's front-panel LED states as a byte string: the first bytes cover power/console/RPS system LEDs, and each subsequent 2-byte pair reports a port's Link/Activity and Speed LED (e.g. a bit pattern showing link-pass plus a 1000Mbps speed code). This lets a management station mirror the physical LED panel remotely instead of requiring someone to walk up to the switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.6.2.1.1.6 snmpwalk -v2c -c public <target> DGS3627-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.6.2.1.1.6.1 snmpget -v2c -c public <target> DGS3627-L2MGMT-MIB::swDevInfoFrontPanelLedStatus.1
Start monitoring D-Link DGS-3627 24-port managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3627-L2MGMT-MIB::swDevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DGS-3627 24-port managed switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.70 | dgsProjectXStackIISeriesProd | SW34XXPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.70.6 | dgs3627 | SW36XXPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.70.6.2 | swL2MgmtMIB | DGS3627-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.6.2.1 | swL2DevMgmt | DGS3627-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.6.2.1.1 | swL2DevInfo | DGS3627-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.6.2.1.1.6 | swDevInfoFrontPanelLedStatus | DGS3627-L2MGMT-MIB |