DGS3612-L2MGMT-MIB :: swDevInfoFrontPanelLedStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS3612-L2MGMT-MIB › swDevInfoFrontPanelLedStatus

swDevInfoFrontPanelLedStatus

Module: DGS3612-L2MGMT-MIB

OID (symbolic): DGS3612-L2MGMT-MIB::swDevInfoFrontPanelLedStatus

OID (numeric): 1.3.6.1.4.1.171.11.70.10.2.1.1.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.

Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks.

The second significant bit is used for link status: 1 = link fail. 2 = link pass.

Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10Gbps.

The four remaining bits are currently unused and must be 0.

What is swDevInfoFrontPanelLedStatus?

A bitmapped snapshot of the switch's front-panel LEDs -- power, console, RPS, plus per-port link/activity and speed indicators encoded two bytes per port. Remote-management tools decode it to mirror the physical panel state without a site visit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.10.2.1.1.6
snmpwalk -v2c -c public <target> DGS3612-L2MGMT-MIB::swDevInfoFrontPanelLedStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.10.2.1.1.6.1
snmpget -v2c -c public <target> DGS3612-L2MGMT-MIB::swDevInfoFrontPanelLedStatus.1

Start monitoring D-Link DGS-3612 Gigabit Layer 2/3 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3612-L2MGMT-MIB::swDevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DGS-3612 Gigabit Layer 2/3 switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.70dgsProjectXStackIISeriesProdSW34XXPRIMGMT-MIB
1.3.6.1.4.1.171.11.70.10dgs3612SW36XXPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.70.10.2swL2MgmtMIBDGS3612-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.10.2.1swL2DevMgmtDGS3612-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.10.2.1.1swL2DevInfoDGS3612-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.10.2.1.1.6swDevInfoFrontPanelLedStatusDGS3612-L2MGMT-MIB