DGS3427-L2MGMT-MIB :: swL2PortCtrlAutoNegCapAdvertisedBits

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS3427-L2MGMT-MIB › swL2PortCtrlAutoNegCapAdvertisedBits

swL2PortCtrlAutoNegCapAdvertisedBits

Module: DGS3427-L2MGMT-MIB

OID (symbolic): DGS3427-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits

OID (numeric): 1.3.6.1.4.1.171.11.70.2.2.3.2.1.12

Node type: OBJECT-TYPE

Type: IANAifMauAutoNegCapBits

Access: read-write

Description: A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity.

Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot be enabled.

Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.

What is swL2PortCtrlAutoNegCapAdvertisedBits?

A bitmask (IANAifMauAutoNegCapBits) of the speed/duplex capabilities this port advertises during auto-negotiation, such as 100baseTXFD or 1000baseTFD; only capabilities already present in the port's actual hardware capability set can be enabled. Admins narrow this to restrict what a port will negotiate to, for example forcing a link to only ever settle on full-duplex modes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.2.2.3.2.1.12
snmpwalk -v2c -c public <target> DGS3427-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.2.2.3.2.1.12.1
snmpget -v2c -c public <target> DGS3427-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.70.2.2.3.2.1.12.1 s <value>

Start monitoring D-Link DGS-3427 managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3427-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits OID value, configure state conditions and alerts, and monitor any D-Link DGS-3427 managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.70dgsProjectXStackIISeriesProdSW34XXPRIMGMT-MIB
1.3.6.1.4.1.171.11.70.2dgs3427SW34XXPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.70.2.2swL2MgmtMIBDGS3427-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.2.2.3swL2PortMgmtDGS3427-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.2.2.3.2swL2PortCtrlTableDGS3427-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.2.2.3.2.1swL2PortCtrlEntryDGS3427-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.2.2.3.2.1.12swL2PortCtrlAutoNegCapAdvertisedBitsDGS3427-L2MGMT-MIB