DGS3426-L2MGMT-MIB :: swL2PortCtrlAutoNegCapAdvertisedBits

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS3426-L2MGMT-MIB › swL2PortCtrlAutoNegCapAdvertisedBits

swL2PortCtrlAutoNegCapAdvertisedBits

Module: DGS3426-L2MGMT-MIB

OID (symbolic): DGS3426-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits

OID (numeric): 1.3.6.1.4.1.171.11.70.1.2.3.2.1.12

Node type: OBJECT-TYPE

Type: IANAifMauAutoNegCapBits

Access: read-write

Description: A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity.

Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot be enabled.

Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.

What is swL2PortCtrlAutoNegCapAdvertisedBits?

A bitmask of the speed/duplex capabilities the port advertises to its link partner during auto-negotiation; only capabilities also present in the port's actual hardware capability set (swL2PortAutoNegInfoCapabilityBits) can be enabled here. An admin narrows this to, say, only 1000baseT-FD to force a slower negotiated speed without fully disabling auto-negotiation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.1.2.3.2.1.12
snmpwalk -v2c -c public <target> DGS3426-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.1.2.3.2.1.12.1
snmpget -v2c -c public <target> DGS3426-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.70.1.2.3.2.1.12.1 s <value>

Start monitoring D-Link DGS-3426 managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3426-L2MGMT-MIB::swL2PortCtrlAutoNegCapAdvertisedBits OID value, configure state conditions and alerts, and monitor any D-Link DGS-3426 managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.70dgsProjectXStackIISeriesProdSW34XXPRIMGMT-MIB
1.3.6.1.4.1.171.11.70.1dgs3426SW34XXPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.70.1.2swL2MgmtMIBDGS3426-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.1.2.3swL2PortMgmtDGS3426-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.1.2.3.2swL2PortCtrlTableDGS3426-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.1.2.3.2.1swL2PortCtrlEntryDGS3426-L2MGMT-MIB
1.3.6.1.4.1.171.11.70.1.2.3.2.1.12swL2PortCtrlAutoNegCapAdvertisedBitsDGS3426-L2MGMT-MIB