All MIBs › DGS-3620-28TC-DC-L2MGMT-MIB › swL2PVIDAutoAssignmentState
swL2PVIDAutoAssignmentState
Module: DGS-3620-28TC-DC-L2MGMT-MIB
OID (symbolic): DGS-3620-28TC-DC-L2MGMT-MIB::swL2PVIDAutoAssignmentState
OID (numeric): 1.3.6.1.4.1.171.11.118.8.2.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID.
If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'.
What is swL2PVIDAutoAssignmentState?
Controls whether a port's PVID is automatically updated whenever its untagged VLAN membership changes, versus only via explicit PVID configuration. Admins enable this to save manual steps when reconfiguring VLANs, or disable it if they need tight, explicit control over each port's PVID.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.118.8.2.2.2 snmpwalk -v2c -c public <target> DGS-3620-28TC-DC-L2MGMT-MIB::swL2PVIDAutoAssignmentState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.118.8.2.2.2.1 snmpget -v2c -c public <target> DGS-3620-28TC-DC-L2MGMT-MIB::swL2PVIDAutoAssignmentState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.118.8.2.2.2.1 i <value>
Start monitoring D-Link DGS-3620-28TC DC-powered Layer 2 managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-3620-28TC-DC-L2MGMT-MIB::swL2PVIDAutoAssignmentState OID value, configure state conditions and alerts, and monitor any D-Link DGS-3620-28TC DC-powered Layer 2 managed switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.118 | dlink_Dgs3620Proj | SWDGS3620PRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.118.8 | dlink_Dgs3620Proj_Dgs3620_28TC_DC | SWDGS3620PRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.118.8.2 | swL2MgmtMIB | DGS-3620-28TC-DC-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.118.8.2.2 | swL2VLANMgmt | DGS-3620-28TC-DC-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.118.8.2.2.2 | swL2PVIDAutoAssignmentState | DGS-3620-28TC-DC-L2MGMT-MIB |